Tractor utilitario compacto 3032E
- John Deere
- Compact Tractors 3 Series
Buscar sucursal más cercana
Buscar ubicación
Características y especificaciones
- Tracción estándar en las cuatro ruedas (4 WD), para una máxima tracción
- Transmisión hidráulica con pedales Twin Touch™ para un fácil uso
- Enganche de 3 puntos categoría 1, compatible con docenas de implementos
- HP de PTO 25
- Tipo de transmisión Hidrostática - 2 rangos
- Enganche de 3 puntos Categoría 1
- Cabina o puesto abierto Estación abierta
- HP* 31,2
- 2WD o 4WD 4WD
- + Expandir todo
- - Cerrar todo
-
La función opcional iMatch™ Quick-Hitch permite el fácil enganche de implementos
Una de las mayores preocupaciones de los operadores se relaciona con la dificultad de enganchar los implementos para tractores. John Deere ha dado respuesta al tema con el iMatch Quick-Hitch.
El iMatch Quick-Hitch proporciona una conexión fácil y un ajuste garantizado para todos los implementos de categoría 1 diseñados para satisfacer la norma S278,6 para enganches de conexión rápida categoría 1 de la American Society of Agricultural and Biological Engineers (ASABE).
- Todos los implementos requieren un set de bujes para que el accesorio se ajuste y funcione adecuadamente con el iMatch Quick-Hitch. El iMatch Quick-Hitch viene con un set de bujes.
NOTA: El set de bujes puede verse en la foto de arriba. Estos bujes permiten que los ganchos en el iMatch y las chavetas en el implemento se ajusten de la manera apropiada. Todos los demás implementos (cuchillas para la caja, cultivadoras, cuchillas traseras, etc.) necesitarán un set de bujes a fin de expandir la chaveta para que se ajuste a los ganchos del iMatch. Los bujes de distintos largos pueden encontrarse en el sistema de partes o a través de un proveedor de bujes (ver las medidas abajo).
- Buje superior
- Diámetro interior: 1,93-1,95 cm (0,76-0,77 in)
- Diámetro exterior: 3,15-3,18 cm (1,24-1,25 in)
- Bujes inferiores
- Diámetro interior: 2,24-2,26 cm (0,88 a 0,89 in)
- Diámetro exterior: 3,63-3,66 cm (1,43 a 1,44 in)
-
El potente motor diésel proporciona gran potencia con cargas pesadas
3025E
El motor diésel Yanmar® 3TNV88F-EPJT1 de 1,64 l (100,2 in³) de cilindrada, enfriado por líquido, genera 18. kW (24,4 hp) al 3025E.
Modelo
Número de
cilindrosDesplazamiento
de motorRpm nominales
Potencia bruta en hp*
Potencia bruta en ps*
HP de PTO
3025E
3
1,64 l (100,2 in³)
2400
18,2 kW (24,4 hp)
24,7
13 kW (17,4 hp)
*kW del motor (hp), SAE J1995: 18,2 (24,4) en bruto a 2400 RPM, PS
Cilindrada, l (in³): 1,64 (100,2)3032E
El motor diésel Yanmar 3TNV88C-NJT de 1,64 l (100,2 in³) de cilindrada, enfriado por líquido, genera 22,9 kW (30,7 hp) al 3032E.
Modelo
Número de
cilindrosDesplazamiento
de motorRpm nominales
Potencia bruta en hp*
Potencia bruta en ps*
HP de PTO
3032E
3
1,64 l (100,2 in³)
2500
22,9 kW (30,7 hp)
31,2
18,6 kW (25 hp)
*kW del motor (hp), SAE J1995: 22,9 (30,7) en bruto a 2500 RPM, PS
Cilindrada, l (in³): 1,64 (100,2)3038E
El motor diésel Yanmar 3TNV86T-NJT de 1,57 l (95,68 in³) de cilindrada, turboalimentado, enfriado por líquido, genera 27,4 kW (36,7 hp) al 3038E.
Modelo
Número de
cilindrosDesplazamiento
de motorRpm nominales
Potencia bruta en hp*
Potencia bruta en ps*
HP de PTO
3038E
3
1,57 l (95,68 in³)
2500
27,4 kW (36,7 hp)
37,2
22,4 kW (30 hp)
*kW del motor (hp), SAE J1995: 27,4 (36,7) en bruto a 2500 RPM, PS
Cilindrada, l (in³): 1,57 (95,68)El motor utiliza las tecnologías más recientes para maximizar el ahorro de combustible, mejorar el control y la precisión y reducir el impacto ambiental. The common rail system (CRS) optimizes fuel economy and reduces operating costs comparted to engines not using CRS technology. La inyección de alta presión atomiza el combustible en partículas más finas, que se queman de manera más completa. Eso resulta en una economía de combustible mejorada y costos más bajos de operación.
La unidad de control electrónico (ECU) ofrece control y precisión óptimos del combustible. La ECU monitorea y controla el motor. Monitorea continuamente las condiciones del motor y ajusta en consecuencia el suministro de combustible, para garantizar rendimiento y emisiones óptimas.
El motor viene con un sistema de postratamiento. El sistema opera automáticamente. El filtro del escape consiste de un filtro de partículas diésel (DPF) que captura las partículas de materia (PM) que contienen los gases del escape. Utilizando un proceso natural de limpieza, la mayoría de las PM atrapadas en el filtro del escape son eliminadas por el calor de la corriente del escape que se genera con el uso normal. En situaciones de temperatura, velocidad del motor o factor de carga bajos se inicia un ciclo de limpieza activo. En este ciclo de limpieza, la temperatura de los gases del escape se eleva mediante la inyección adicional de combustible durante la carrera de escape de la operación normal del vehículo al catalizador de oxidación diésel (DOC).
Después de muchas horas de uso, es posible que el filtro del escape necesite de servicio para eliminación del hollín.
Limpieza del DPF
Según cual sea la carga del tractor, al igual que la temperatura ambiente, la humedad y la velocidad del motor, el DPF puede acumular material particulado, por lo cual será necesario limpiarlo. La limpieza del filtro depende de una de las siguientes tres condiciones:
- Una estimación prescrita con base en el tiempo de la necesidad de limpiar el filtro
- Los sensores de presión DOC/DPF
- Una estimación de la acumulación del material particulado, basado en las condiciones de la carga
Una vez que cualquiera de esas tres condiciones se cumpla, será necesario limpiar el filtro.
Hay tres tipos diferentes de procesos para limpiar el filtro:
- Limpieza de filtro pasiva
- Limpieza de filtro activa
- Limpieza de filtro en modo estacionado
Limpieza de filtro pasiva
La limpieza pasiva del filtro ocurre de manera natural, cuando el motor está generando el calor suficiente para oxidar el material particulado. Ese proceso automático ocurre de manera continua, durante las condiciones normales de operación. No aparece ningún ícono o símbolos de tractor en la pantalla, durante la limpieza pasiva del filtro.
NOTA: La limpieza pasiva del filtro no necesita de la participación del operador y no hay interrupción alguna en la operación del tractor.
Limpieza de filtro activaSi no pueden lograrse las condiciones (de temperatura, cargo o velocidad) para la limpieza pasiva del filtro, el PM debe removerse entonces utilizando la limpieza activa del filtro.
Para conseguir las condiciones requeridas, la gestión de la temperatura de escape (ETM) controla el inicio y la duración de la limpieza activa del filtro. La ETM puede ajustar numerosos parámetros del motor y/o inyectar una pequeña cantidad de combustible en el caudal del escape durante un breve período. El combustible se convierte en vapor y reacciona químicamente con los catalizadores en el DOC, a fin de generar calor para oxidar el PM.
Es importante destacar que en ningún momento hay ignición alguna del combustible en el DOC/DPF y que no se produce ninguna llama dentro del DOC/DPF.
Al igual que con la limpieza pasiva del filtro, la limpieza activa del filtro no requiere ninguna participación del operador ni hay interrupción alguna en la operación del tractor.
Limpieza de filtro en modo estacionado
En algunos casos en los cuales ni la limpieza pasiva del filtro ni la limpieza activa del filtro han depurado totalmente del sistema el PM, puede ser necesaria una limpieza del filtro en modo estacionado. En general, la única oportunidad en que será necesaria una limpieza de filtro en modo estacionado será cuando se haya desactivado la limpieza automática del filtro por un período de tiempo muy prolongado y se hayan desestimado múltiples alertas para activar la limpieza del filtro, o el tractor se haya utilizado en condiciones de carga ligera. Además, cuando el proceso de limpieza automática del filtro se haya interrumpido deliberadamente en varias ocasiones, o haya fallado una limpieza activa del filtro en numerosas oportunidades debido a fallas de un componente, podría pedirse una limpieza del filtro en modo estacionado. En esas raras ocasiones, el operador deberá estacionar el tractor e iniciar el proceso de limpieza del filtro.
El proceso de limpieza del filtro en modo estacionado debe activarse en función del uso y la operación del tractor. El proceso tomará aproximadamente 30 minutos. Ver el manual del operador para obtener más información.
El sistema monitorea constantemente el nivel de acumulación de hollín del tractor, a fin de garantizar que el tractor esté siempre en su máxima condición de rendimiento. Eso garantiza un rendimiento óptimo en todo momento.
NOTA: La cantidad de horas desde la última regeneración y el nivel porcentual de hollín pueden verse en la pantalla LCD.
Las características clave del motor son:
- Económico diseño de cilindro de fundición en bloque, para un buen enfriamiento y vida prolongada
- Inyección directa de combustible
- Arranque mejorado
- Inyecta combustible directamente sobre los pistones, para una combustión más eficiente
- Desarrolla mayor potencia por litro (galón) de combustible que los motores de inyección indirecta
- Los pistones de aleación de aluminio son livianos a fin de reducir la carga de los cojinetes de biela y aportar buenas características de transferencia de calor
- El diseño permite tolerancias más ajustadas y neutraliza la expansión del pistón, lo que reduce el golpeteo y el ruido del golpe de pistón
- Los anillos superiores son más altos en el pistón y se utiliza una junta de culata más fina para reducir en gran medida el volumen de gases residuales no incinerados y aumentar la eficiencia de la combustión
- Los engranajes de distribución y los engranajes impulsores de la inyección tienen un perfil helicoidal para reducir el ruido del motor
- Sistema de combustible con purga automática
- No hay necesidad de cebar el sistema si el tractor se queda sin combustible
- El sistema cebará automáticamente la bomba de inyección, los conductos y los inyectores, proporcionando una rápida recuperación del combustible para un arranque más fácil
- El sistema de lubricación de gran capacidad proporciona aceite filtrado, a presión, a todos los cojinetes del motor para una larga vida útil
- Key start and shutoff eliminate fuel shutoff knob
- Electric solenoid shuts the fuel supply off immediately when key is turned off, which replaces the need to pull a fuel shutoff lever like many older tractors
- Filtro de combustible con elemento reemplazable
- Separador de agua con filtro reemplazable adicional
- El tanque transparente de recuperación del refrigerante permite al operador verificar el nivel del refrigerante sin necesidad de quitar la tapa del radiador
- Filtro de aire de tipo seco con elemento de seguridad
- Diseño de doble elemento para protección adicional del motor
- De fácil mantenimiento
- El capó se puede abrir fácilmente sin herramientas para tener un acceso total al motor
- Fácil acceso a los puntos de llenado y comprobación del motor en el lado derecho del tractor al retirar los paneles laterales.
Yanmar es una marca registrada de Yanmar Company Limited.
-
La excelente facilidad de mantenimiento reduce los costos operativos y mejora la productividad
El servicio y el mantenimiento frecuentes son esenciales para el rendimiento, la productividad y la durabilidad del tractor.
- El acceso fácil a los puntos de servicio más frecuentes minimiza el tiempo de servicio.
- Four quarter turn fasteners allow operators to easily remove the engine side panels without tools to access the engine compartment.
- Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with the John Deere exclusive Service ADVISOR™ system.
- El intervalo de servicio de fluido hidráulico aumenta a 1200 horas con el uso de productos Hy-Gard™.
- El filtro de fluido hidráulico necesita ser reemplazado cada 400 horas.
- El tanque del combustible está situado en la parte trasera del tractor, para permitir un acceso fácil durante el reabastecimiento.
- El soporte de elevación de gas debajo del capó elimina la necesidad de utilizar una varilla de soporte
- Los requisitos de servicio diario son mínimos y fáciles de lograr. La mayoría de los requisitos de intervalo de servicio pueden ejecutarse con un entendimiento básico de los procedimientos y herramientas comunes.
Todos los ítems del cronograma de servicio diario pueden cubrirse sin necesidad de usar herramientas:
- El acceso al aceite del motor, fluido hidráulico, refrigerante y separador de agua es sumamente práctico.
- Se puede tener acceso fácil al motor con solo levantar el capó para controles de mantenimiento más frecuentes.
NOTA: Siempre consulte el manual del operador para ver todas las recomendaciones de mantenimiento y servicio. -
La transmisión hidrostática (HST) fácil de usar incrementa el rendimiento del tractor
Los tractores 3E están disponibles con una transmisión hidrostática (HST) de dos rangos incorporada en una caja de transmisión de aluminio fundido. El fluido bajo presión transmite la potencia del motor a las ruedas motrices a través de un mecanismo con bomba de circuito cerrado y motor. Velocidades de avance infinitas que permiten al operador adaptar la velocidad del tractor a la tarea por acometer.
- Sin necesidad de embragar, para cambios de dirección rápidos y sencillos
- Pedales Twin Touch™, para operación rápida y fácil en avance/reversa
- Enfriador del fluido de transmisión, para una mayor vida útil de la transmisión
Las funciones de seguridad de la HST incluyen:
-
El tractor solo arrancará con la palanca de rango en neutro
-
El motor se apagará si el operador se levanta del asiento a menos que la palanca de rango esté en neutro
-
El motor se apagará si el operador se levanta del asiento y la toma de fuerza (PTO) está activada
Controles de pie Twin Touch
Ventaja clave de John Deere - Los controles de pie Twin Touch de John Deere ofrecen varias ventajas clave en comparación con los modelos de tractor con HST de la competencia.
-
Algunos tractores hidrostáticos de la competencia ofrecen un diseño de control de pie de pedal oscilante (puntera-talón) para operar la HST
- Eso requiere que el operador utilice tanto la puntera como el talón para cambiar de dirección, lo que resulta en una mayor fatiga para el operador
- The Twin Touch configuration also makes it easier to "inch" the tractor forward or rearward (i.e., when attaching to implements)
Control de crucero opcional
Los tractores de la serie 3E se pueden equipar con un interruptor opcional de control de crucero instalado en la consola de control derecha. Esto da al operador la capacidad de mantener una velocidad constante al utilizarlo para transportar, segar un terreno u otros usos en los que se necesita el uso prolongado de la transmisión. Este kit se instala de manera rápida y fácil para quienes deseen tener esta función.
Motor y bomba hidrostática integrados
- La compañía Sauer-Danfoss® ofrece el motor y la bomba integrados; esto garantiza que los componentes sean compatibles unos con otros, lo que permite un máximo de eficiencia
- Reduce las cargas de choque del tren motriz
- Ofrece la fuerza y durabilidad necesarias para operar accesorios como cargadores
- Un solo depósito (con un punto de comprobación de nivel y un punto de llenado) para la transmisión, el diferencial y el sistema hidráulico agiliza el mantenimiento diario
- El accionamiento mecánico a través de los pedales Twin Touch permite seleccionar ambas direcciones de desplazamiento y velocidad con solo tocar un botón
Punto de comprobación de nivel del depósito de la transmisión
- Easy-to-reach transmission fluid dipstick allows for frequent checks of the transmission fluid level.
Punto de llenado de la transmisión
- Easy-to-reach transmission fill point (A) is located on top of rear axles on the right-hand side.
Pedal de freno y bloqueo del diferencial integrados
- Foot-actuated differential lock is integrated into the brake pedal to simplify operator controls; the differential lock is included as base equipment to assist traction in tough spots.
- Press the brake pedal down half way to engage the differential lock that locks the rear axle for improved traction in tough spots.
Sauer-Danfoss es una marca registrada de Sauer-Danfoss, Incorporated.
-
La estación para el operador sencilla y despejada también es cómoda y práctica
Un diseño despejado da a operadores de cualquier tamaño un amplio espacio para sentirse cómodos. Hay controles con código de color ubicados a ambos lados del operador.
- The hydrostatic transmission (HST) and brake pedals are designed and located for maximum comfort and ease of use.
-
Asiento cómodo y amoldado, que mejora la comodidad del operador.
- Seat position adjusts fore and aft.
- El asiento se vuelca hacia adelante, para protección de los elementos
- Flat operator platform provides for easy entry to and exit from the tractor.
-
La estructura protectora contra vuelcos (ROPS) Folding Roll-Gard™ y el cinturón de seguridad retráctil aumentan la protección del operador.
Sistema de presencia del operador:
-
Si el operador se levanta del asiento cuando el tractor está en marcha, el motor se apaga
-
Si el operador se levanta del asiento cuando la toma de fuerza (PTO) está activada, el motor se apaga
Peldaño del lado izquierdo
-
El peldaño del lado izquierdo permite un fácil acceso y salida del tractor.
-
La plataforma para el pie cuenta con una superficie no deslizante, a fin de plantarse con seguridad.
Asiento
El grueso y suave acolchado en este asiento suministra una operación cómoda y sin problemas.
- El asiento se vuelca hacia adelante, para protección de los elementos
- Ajustable mediante el uso de la palanca situada debajo para moverlo hacia adelante y hacia atrás, el asiento se desliza sobre carriles inclinados para suministrar cómodo acceso a todos los controles.
Instrumentación
El tablero de instrumentos, fácil de leer, incluye lo siguiente:
- Tacómetro
- Indicador de baja presión de aceite
- Indicador de descarga de la batería
- Indicador de activación del PTO
- Indicador de luces de giro/peligro
- Multifunction liquid crystal display (LCD) display (hours, filter cleaning information, etc.)
- Luz indicadora del estado de limpieza del filtro
Indicador de combustible
All 3E Series Tractors come standard with a fuel gauge that is easy to read from the operator's station to ensure operators do not run out of fuel.
Seguridad
Interruptor de presencia del operador (OPS) en el asiento:
-
El sistema OPS requiere que el operador esté en el asiento, a fin de operar la transmisión o el PTO.
-
La ROPS está diseñada para satisfacer o superar los estándares de seguridad de la American Society of Agricultural and Biological Engineers (ASABE).
-
Franjas reflectoras ROPS para una mejor visibilidad del tractor.
-
Los cinturones de seguridad son equipo básico en todos los tractores utilitarios John Deere.
-
El bloqueo de la llave de encendido impide arrancar el tractor sin utilizarla.
-
Luz de alerta visible de PTO en el tablero de instrumentos advierte al operador cuando el PTO está activado.
-
Las luces de giro e intermitentes de peligro operando de conformidad con los estándares de ASABE.
-
Se proporciona un rótulo que indica que el vehículo se mueve lentamente (Slow-moving vehicle, SVM) para los viajes en carretera.
Freno de mano
-
Freno de estacionamiento estilo automotor y manual para activarlo/desactivarlo con facilidad.
-
El tablero de instrumentos tiene un indicador para el freno de mano.
Estructura protectora contra vuelcos (ROPS) Roll-Gard de dos postes
Los tractores de la serie 3E están equipados con ROPS Roll-Gard. Las ROPS plegables satisfacen los estándares de ASABE para tractores utilitarios compactos.
- With the Roll-Gard ROPS folded down, producers can easily to get their tractor into a garage with a standard 2,1-m (7-ft) garage door.
NOTE: The use of seat belts is recommended at all times when operating the 3E Series Tractor with the folding ROPS upright.
An optional canopy (LVB25334) is available to help protect the operator from the elements.
-
Válvula de control selectiva (SCV) de dos bobinas opcional para un rendimiento superior de los implementos
Los tractores de la serie 3E pueden equiparse con un kit hidráulico remoto trasero para instalación en el campo, lo cual proporciona dos bobinas hidráulicas adicionales en la parte trasera del tractor. El kit se puede instalar en el campo en un tractor con cargador o sin cargador.
NOTE: Not compatible with the power beyond kit.
Las funciones son totalmente independientes de las del cargador. Estos controles remotos traseros se pueden conectar con una amplia variedad de implementos y accesorios, tales como:
- Cuchilla hidráulica en ángulo
- Tolva/canalón de control hidráulico en un soplador de nieve montado en un enganche de 3 puntos
- Escarificadores hidráulicos en una niveladora
- Muchos otros accesorios hidráulicos traseros
Este kit versátil brinda a los operadores de tractores de la serie 3E las opciones que desean para poder utilizar sus tractores en una gran variedad de tareas.
La primera bobina está equipada con una posición flotante, lo cual da al operador la capacidad de contornear el terreno y de mejorar la pendiente final con ciertos implementos.
NOTA: Ninguna de las bobinas en este kit tiene una posición de distensión, por lo cual no deberán conectarse a nada que sea operado por un motor, en vista de que la válvula no fue diseñada para operar en posición abierta. El kit está diseñado para un caudal hidráulico momentáneo a demanda, tal como el traslado de un cilindro.
Enganche de 3 puntos
Tipo | Categoría 1 |
Capacidad de elevación, 24 in. detrás de los brazos de enlace | 615,1 kg 1356 lb |
Dimensiones
Distancia entre ejes | 159,5 cm 62,8 pulgadas |
Peso de flete aproximado (estación abierta; cabina) | 1.007,9 kg 2222 lb |
Altura libre del eje frontal | 36,3 cm 14,3 pulgadas |
Radio de giro sin frenos | 2,9 m 9,4 ft |
Función eléctrica
Tamaño de la batería | 500 CCA |
Alternador (12 V) | 55 A |
Motor de arranque | 1,4 kW 1,9 hp |
Motor
Fabricante | Yanmar |
Modelo del motor | 3TNV88C-NJT |
Velocidad nominal del motor | 2500 rpm |
Tipo de bomba de inyección | Inyección directa de alta presión en carril común |
Aspiración | Natural |
Cumplimiento de normas de emisiones | Final Tier 4 |
Cantidad de cilindros | Tres |
Revestimientos del cilindro | Bloque fundido |
Índice de compresión | 19,1:1 |
Lubricación | Presurizado |
Sistema de enfriamiento | Bomba de agua |
Filtro de aire | Elemento doble |
Tipo | Diésel |
Toma de fuerza (PTO) | 18,6 kW 25 HP |
Cilindros/desplazamiento | 3 / 1,64 L 3 / 100,2 in³ |
Familia | EYDXL1,64NDA FYDXL1,64NDA GYDXL1,64NDA |
Diámetro y carrera | 88 x 90 mm 3,46 x 3,54 in |
Potencia del motor (bruta) | 22,9 kW 31,2 hp |
Capacidad del tanque de combustible | 28,5 L 7,5 galones |
Par de torsión de motor a velocidad nominal | 87 Nm 64,2 lb-ft |
Transmisión final
Tipo | Engranaje de giro |
Capacidades de fluido
Cárter con filtro | 4,5 L 4,8 qt |
Sistema de combustible
Tipo | Inyección directa de alta presión en carril común |
Hidráulica
Tipo | Central abierta |
Tipo de bomba | Doble engranaje |
Detección de control de tiro | Control de posición |
Válvulas con control remoto disponibles | Hasta dos (opcionales) |
Presión máxima de funcionamiento | 172,4 bar 2500 psi |
Salida nominal de la bomba | Dirección 15 L/min 4 gpm Implementación 20,2 L/min 5,3 gpm 35,2 L/min 9,3 gpm |
Especificaciones clave
Transmisión estándar; avance/reversa | Transmisión hidrostática (HST) |
Control de crucero | Opcional |
Tipo de enganche | Categoría 1 |
Dirección hidráulica | 15 L/min 4 gpm |
Implementos hidráulicos | 20,2 L/min 5,3 gpm |
Peso de flete aproximado (estación abierta; cabina) | 1.007,9 kg 2222 lb |
Potencia del motor (bruta) | 22,9 kW 31,2 hp |
Distancia entre ejes | 159,5 cm 62,8 pulgadas |
Capacidad de elevación, 24 in. detrás de los brazos de enlace | 615,1 kg 1356 lb |
Toma de fuerza (PTO) | 18,6 kW 25 HP |
Puesto del operador
Plataforma: plana/estilo pórtico | Semiplana |
Ubicación del cambio de marchas: consola/piso | Lado izquierdo |
Estructura protectora contra vuelcos | Tipo Plegable ASABE S478 |
Toma de fuerza (PTO)
estándar | 540 RPM a 2500 RPM |
Control | Independiente |
Freno (para PTO media y trasera) | Wet disk |
Embrague | Wet disk |
Neumáticos
Trasero | Agrícola - 11,2-24 Césped - 41x14-20 R4 - 15-19,5 R4 - 43x16-20 |
Frente | Agrícola - 7-14 Césped - 27x8,5-15 R4 - 25x8,5-14 R4 - 27x8,5-15 |
Transmisión
Transmisión estándar; avance/reversa | Transmisión hidrostática (HST) |
Transmisión final | Engranaje de giro |
Frenos | Disco para condiciones húmedas |
Dirección | Dirección asistida |
Velocidad superlenta | No |
Control de crucero | Opcional |
Bloqueo del diferencial | sí |
Reversa a la izquierda | No |
Capacidad del eje | Frente 798 kg 1760 lb Trasero 1197 kg 2640 lb |
4,63
Extremely reliable
I bought mine in 9/18. I have 190 hours on it & it has been a trouble free great tractor.
WalterD
- Desde: Florida
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
Lots of mechanical issues
We have had this since 2008 with about 150 hours on it. We have had to replace the front axle seals 4 times and now they are leaking again. We have had to replace the tach once and now it is not working again. Have had it in 3 times because the forward pedals stick and the tractor literally will keep going if you take your foot off. Most of the issues were covered under the warranty but now that is expired and the issues are reappearing. Not covered under warranty is the cost to have the tractor hauled in for repair each time. This has been a problem tractor. Buyer beware!!
explore
- Desde: Stillwater MN
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
2 stars
Almost 200 hours on the tractor now. Just like another reviewer, we've had the tractor in three times for faulty front axle seals, and the tach doesn't work consistently. My biggest gripe, however, is that you can't put ice chains on the tractor without using spacers--no wheel clearance. The sway bars are also super close to the wheels without spacers. I wrote to John Deere corporate about these issues and they are a bunch of non-responsive idiots, in my opinion. You also can't put a 3pt hitch backhoe on it. We had to mount a backhoe onto a subframe, which takes away clearance. Wouldn't buy this tractor again, and I'm not impressed with John Deere corporate or our local dealer. Going orange next time around. You get a pretty JD tractor at this price point, but don't be fooled.
Vermonter
- Desde: East Montpelier, VT
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
nothing disappointing .
this little tractor pulls like a mule. no frills, just the basics. very light, be careful.
wdan40
- Desde: Kennebec County, ME, USA
- Frecuencia de uso: Mensual
- Nivel de experiencia: Experto
Nice little tractor
We looked at a few brands of tractors Dec 2011... decided on this one. Needed small enough to get through the woods and still be powerful enough to move gravel and manure. Is a pretty strong tractor for its size and at 120 hours... the only issue we have had was a sticky gas pedal. Husband greased the linkage, and no more issues. So far, it is doing what we need it to do.
Shari
- Desde: Bowling Green, VA, USA
- Frecuencia de uso: Diario
- Nivel de experiencia: Intermedio
perfect for the small ranch
bought it june 2016 have 40 acres for hunting and retirement food plots brush hog and the wife loves it best investment you can get for the long term
BuckRubRanch
- Desde: Gladwin, MI 48624, USA
- Frecuencia de uso: Semanal
Great Overall Tractor for maintance of large property
I just bought this tractor 4 days ago, and I love it. Great quality, great value, great price. Only thing I don't like about the Deere is all the plastic parts. Would like to see a self adjusting linkage adjustment and not something I need to adjust with a wrench.
FCL1588
A hard worker
I have 130 hours on this tractor and it has not disappointed. Well built, good quality, small enough to get into tight places yet adequate power to do medium to heavy work. I have done hauling, mowing and post hole digging with a 12" auger and no problems. It's easy to maneuver and does not leave a deep footprint. On the flip side, the engine is really noisy at start up when cold but runs smoothly when warmed up. The loader is too sensitive. It lacks a draft mode on the 3 pt. hitch. It's very difficult to change one of the hydraulic filters. A bigger tool box would be nice as would an additional and deeper cupholder. Service where I deal is really good. The manager came out and explained some of the features and recommended some operating practices.
Chasgreene
- Desde: Valparaiso, Indiana
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
It's a beast
I bought my 3032e in 2009 got near 500 hours on it. I have the 305 loader on mine. Have ruptured 2 hoses due to my trying to overwork it's capacities. I also have 60" box blade, 60" rough cut and finish mowers, 60" tiller and disc harrow. Once I added water/antifreeze mix to rear tires it pulled much better and had a more stable footprint. I have had Tach issues and easily corrected by tightening the fan belt which had come loose? Have not had any front axle seal issues and I run mine through rough terrain and swamp bottoms here in middle Ga. I have plans to add a 5000lb winch as I have had it stuck to the frame in sloppy mud. I mainly use it on my 500 acre hunting lease. It has proven itself to be a tremendous investment. Only part I have had problems with is the adjustable link from the rockshaft arm to the 3pt lower arm Have replaced it twice. oh and the rear turnsignal/running lights are mounted in bad location for running through the woods. Mine broke off within the 1st 6 months
roboice
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
Good little tractor
Bought the tractor new in 2011 and has 250 hours on it. We have a 10,5 acre hobby farm. Use the following: 6' finish mower, 5' brush cutter, 4' tiller. Two warranty claims with less than 50 hours: fender tool box cracking and cracking seat cover. New seat is cracking again. It is stored inside. The new material used is too briddle. Contacted the dealer, and haven't gotten response. The only other problem is oil around rear end and don't know where coming from, but not leaving pool on ground, so hopefully not too big an issue
cmrausch84
- Desde: Oxford, IN
- Frecuencia de uso: Diario
- Nivel de experiencia: Intermedio
Great Work Horse
We bought this tractor brand new, much at my (new) wife's disgust, as she wanted a Bass Boat and so did I!!! LOL However we bought a five acre property which requires being kept mowed(Slashed) at least once a month if not every three weeks. The property also has large oak trees which loose branches etc and moving these large branches is easy with the 3032. I'm originally a city boy so basically no idea about the country. But the 3032 has made working around the property very easy.
Jeffcityboy
- Desde: Karnack, TX 75661, USA
- Frecuencia de uso: Semanal
- Nivel de experiencia: Principiante
Great tractor
Easy to handle, loads of power. Would be nice if there was a mirror so you can check on what you're towing without having to turn around.
Yogi29940
- Desde: SC
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
2016 3032E
Have had this tractor for five years, and overall it has done a good job. Forced dealer to fit it with agricultural tires instead of the stock industrial tires, which is one of the best moves. Have used it for light planting, brush clearing, skidding, and mowing of 17 acres. Has been very difficult to find weights, as the bolt pattern does not match the JD stock. Have also had ongoing problems with the brakes since the first three months, and dealer will not even discuss the issue until we pay for pick-up and shop time.
GlaciersAndTrees
- Desde: Upstate, NY
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
Pretty Good tractor
I bought my tractor new in August of 2019. I currently have about 700 hours on it. I've had one issue that required the tractor going back for service. That was a cylinder for the steering went out. I'm not a fan of the plastic pieces on the tractor. I use it year round in every season. In the dead of winter in Maine, the plastic pieces become brittle and crack or break. But, the metal is strong, the welds are good and the engine is good. I also bought the backhoe attachment when I purchased the tractor. It works, but not nearly the power I wish it had. It pulls a scraper blade just fine, and this summer I will try out a fence post auger I recently bought. I'm a disabled vet, and I cannot get around to do the things I use to. This tractor has definitely made my life easier. It helps me clear the land of trees and rocks, to helping me create pastures for gardens and animals. With the exception of Jan and Feb I am using the tractor almost daily. I gave it 4 stars, as I do not like plastic on tractors and it also has a catalytic converter. I couldn't believe that. Outside of regular services for oil or whatever it has been reliable. I will probably upgrade to a bigger one some day as I have had some times where I could have used more power. Good tractor.
Uncle Cracker
- Desde: Searsport Maine
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
Simple yet effective!
I bought this machine with low expectations but was pleasantly surprised, after my skid steer went down and no time to fix it I decided I needed to add a back up for my skid steer when it went down, functionality is great and power is spot on. I have approximately 10 hours on the machine and I have not found a deal breaking flaw, i have found a few little things that i would change so far, key switch is much like ball hitch on a pickup just waiting for my knee to base into it, the push button controls on the dash are not lighted when the lights are on and in the dark you cant see what you are are push without another source of light, I like the speed of the loader functions but it would be nice if the curl and lower was a little faster, the forward driving lights are good until the loader bucket is in the way, I added the Deere led aux front light kit and one rear facing light and now its great. overall I am very pleased with this tractor and it does great for what i use it for, my skid steer may do it better and faster but the 3032E can hold its own. I also added the bluetooth module for live up to date stats!
srv mngr 1
- Desde: Iowa
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
Can't complain...it surprises me every time!
I am admittedly not a huge John Deere fan. We have some equipment that just seems to give us problems left and right and just because it is JD, means it is more expensive to fix. So, I'm a hard-sale when it just comes down to paint color. However, last year I needed a new tractor for a 40-acre property just purchased that needed work and clearing. I ran across this baby and decided to give it a shot for the price. And...I am still loving it! This beast makes me forget it is a compact utility tractor. It handles EVERYTHING we've thrown at it without fuss. Absolutely no issues. Love this tractor not only for its uses but versatility. I'm 5'0 and can operate with no issues at all. Hubby is 6ft and doesn't feel cramped...Thank you John Deere for putting out such a great product.
angeltod
- Desde: Shreveport, LA
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
1 year review
I've owned this tractor for just over a year so I feel now is a good time to offer my feedback. My experience has been nothing but positive with the 3032e. I've used it to clear cactus and brush, haul road base, pull stumps, etc. It has performed as expected. It is very easy to operate AND maintain. I am extremely satisfied with my purchase.
Brianb
- Desde: Hondo, TX 78861, USA
- Frecuencia de uso: Mensual
- Nivel de experiencia: Principiante
Excellent tractor
I have had this tractor since Nov. of 2011 and I have put 125 hours on it with no problems. I use it mainly for mowing my lawn with a 6' finishing mower but have used it on a 7' blade, 5' tiller and a 5' rotary mower. Has never ran out of power and does excellent on fuel. It is a lightweight tractor so it does not tear up my lawn. I love the twin touch pedals it comes with. I researched several other brands and am real pleased that chose this one. It is a pretty basic tractor but it does what I have always wanted it to.
Peterbilt
- Desde: Sisseton, SD 57262, USA
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
You cannot match the quality and price anywhere, and I mean anywhere!!
I simply cannot believe the power and ease of operation with my 3032. I have the 65" roto tiller, the front loader and a set of pallet forks on my unit. Everything I do is easy and quick now. Hats off to John Deere.
TonyT
- Desde: Jonesburg, MO 63351, USA
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
2021 model
Honestly was kind of sceptical of only having 25hp. It really surprised me how it can walk up and down my hills. Only issue I had was 1 of the lines to the front loader was finger tight. A wrench and 2 min later was fixed. Have 85 hrs on mine 90 % is useing the pto. Looking forward to many more years of use.. will update if anything changes
MotherNorth
- Desde: Huntingdon TN
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
Great value and ease of use.
My dad bought one about 3 yrs ago and I have used it a good bit. I just bought one that is a 2018 model and I like the improvements with the fuel tank being put behind the seat for easier fueling and not getting it on the hood. I am having a rear remote put on it but they are having to up grade it due to the fuel tank being behind the seat, other than that it is a great tractor for what I need. I need the rear remote to run a wood slitter. I plan on using it for gardening and mowing my pastures.
Jimbo135
- Desde: Calhoun, Ga
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
Awesome little tractor!
The only thing I regret about this tractor is not buying it sooner. It pulls and operates a 5ft rough cut mower with ease and runs a 6ft rotatiller just fine as well. My main use for it was for snow removal, but I find myself using it for every project I have in the yard and of course in the field. Why is this review page so picky about a Nickname? I almost cancelled my review out of frustration!
JDTractorer
- Desde: Drayton Valley, AB, Canada
- Frecuencia de uso: Semanal
- Nivel de experiencia: Principiante
A really dependable little tractor
I bought mine new in the front of 2011 with a loader and auger, and it hasn't broke yet. I haven't had any hydraulic issues other than on a scorching hot day on a 5-ft bush-hog cutting heavy brush and grass, the hydro-static tractor gets hot and bogs down after about 8 straight hours. That's fine though, after 4 hours or so you will want a break cuz its a rough ride with its short wheel base. It's size was perfect for me working in the woods, and clearing the thicket around the house. It's FWD works very well, and i love the hydro-static for mowing and working in tight quarters. If you got a 10 acre place or smaller, its really hard to beat and payed less than the orange tractor. A tank of fuel will last a while, the Yanmar is an efficient little diesel. I suggest a bigger tractor if you do alot of loader work because the 305 loader could use more piston power. Recommend the R4 tires to prevent tearing up your property, and better flotation.
Jskidmore
- Desde: South Arkansas
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
new tractor owner
So far a great little tractor. Getting use to the loader moving snow. Fun tractor to drive and operate.
pete377
- Desde: Philadelphia, PA, USA
- Frecuencia de uso: Semanal
- Nivel de experiencia: Principiante
Shop around before buying
My 3032E has been in the shop almost as much as on my small place. Seals in the left front have been replaced several times (3) still leaks. PTO quit working, stayed in the shop for over a month that time. Now it just came home after a small bolt broke off ( on the hitch) with no load on it. It's a 2009 model (that's when I bought it new) It does have pretty "Green" paint. I always was told , "you pay more for that "Green" paint. I only have 300 hours in 8 years
EugeneDebs62
- Desde: Grantville, GA, USA
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
Great value for your money!
I have five acres wth big fir and oak trees and lots of blackberry bushes needed a tractor. The property has never been developed or worked. I started looking at all the major brands, orange, green, red, and blue. You probably get my drift on the brands. When it all came down to it Jong Deere was in the middle of the pack as far as price. John Deere was the only one offering zero percent financing . Let's also be honest who dosent want a green machine, l always wanted one as a kid. So I bought a 3032e with a front end loader, brush hog ,box scraper and rototiller. I work for the local power company and we use John Deere equipment . We work our equipment hard and their stuff holds up! I be lost with out my green machine! I have had it for three years and almost 300hrs on it and no problems yet!
Powerlineman40
- Desde: Hillsboro, OR, USA
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
Good tractor for an average homeowner
I have had this tractor for three years now, The front axle seals have went bad 3 times and the tach stopped working the day I brought it home. The tractor had 96 hours on it then finally the dealer replaced the tach. The rear end was really light which I had to use 4 wheel allot more than I would have like to but I filled them full of fluid and it has been allot better. As for the price I have found several tractors with the same specs as this one for upwards of $4000 cheaper brand new. The only reason I went green was because they have their own financing which at the time was helpful for me. Overall I have liked the tractor its done well for me.
Bice
- Desde: Plymouth, UT, USA
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
Awesome tractor for a tight budget
I love this tractor. It fit in my budget and is capable of doing most of the work I want it to do. I use a 5ft brush cutter, finish mower, box blade, rake, and scraper. The tractor operates all with ease. I wish the bucket roll-back strength was better and I wish low gear was a little lower. An independent diff lock pedal would have been preferred. It is great on fuel and the ergonomics set the standards for all to follow. I am 6'3" and find it roomy even for my large feet. The controls are very easy to use especially the forward and reverse pedals. I have had zero issues and have not found any defects or blemishes. Oh, and I look totally cool on it.
James772
- Desde: Huntsville, AL
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
Outstanding Purchase
I bought my John Deere 3032E for ranch work in the Tehachapi Mountains. It has impressed me with every use . It is incredibly useful and I am very pleased that I chose it .
Old Plantation Man
- Desde: Tehachapi, California
- Frecuencia de uso: Semanal
- Nivel de experiencia: Principiante
Great Tractor
Bought this 3032e in September, 2014. Just turned 200 hours (February, 2016). Use it for rough and finish mowing, moving sand, gravel, rocks, pulling trees, moving and turning manure. I've been extremely happy with its capability, reliability and size.
Brad2
- Desde: Greenwich, CT
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
Tractor has great power and very easy to use
I bought this tractor in may and put 275 hours on it with no problems. It gets great fuel economy. I run a rotary cutter, soil pulverizer, tiller, box grader and wood chipper. Plenty of power. Loader works great just a great value .
Lawnboy
- Desde: Bluffton, IN 46714, USA
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
m
I have only had this tractor for a few days and man has it made my life so much better. Runs a 6ft brush hog great and has not bogged down one bit even in heavy brush. used it to move 1200 lbs. round bales with a rear bale spike and had not one problem with picking it up. I will say that it is a little light in the front end. But I just grab a load dirt in the FEl and it keeps me from having any problems there. Could use a little wider rear tires so when using some 3pt. it will not rub the tires on the inside. I will get some wheel spacers to fix that. I can not wait tell the hay cutting season so I can use the sickle mower and wheel rake on this tractor so I don't have to use the bigger tractor that's hard to get in to some of the places to cut hay. The FEL works great the only complaint I would have to say about it is that its not a skid steer style bucket but there is adapters out there to make them work if needed. If your looking for a great tractor with out all them extra's and lots of power for around a small farm than the 3E will get the job done. If I had to do it all over again I would buy it this tractor over the orange tractor that's way over priced. The Sales Department at Farm Lawn & Leisure are great did not try pushing me into a tractor the did not fit my needs. John Deere had some great APR rates too. Oh and there insurance is dirt cheap
Jdayday02
- Desde: Columbia, Mo
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
3032e....wow
This is the easiest tractor to use very diverse. If your not a huge farm this is the perfect tractor for the house and 35 acres of land. I have 456 hours not a problem I have worked this tractor to death it never fails to do what I ask of it, When I went shopping I check Kubota and Mihindra both good tractors. The John Deere was the best fit for me. For all the things they says that they do better than my lil 3032e well there are pros and cons to this argument. sometimes it comes down to the fit for your life and ease of use .....for me that was the 3032e. The 3038e was quite impressive however I did want a turbo because that was one more thing to replace in about 5 or so years. I look at my John Deere everyday and Im proud of my purchase. I regret nothing. when it came down to kubota or J D the dealer kept pushing the free trailer. Well if you do the math in each attachment to get the free trailer... you are really paying for it. John Deere offered 0 o/o for 5 years it was cheaper than Kubota. with the same attachments you had to buy 1 or attachment than deere to get the free trailer but I can build a trailer and I did. The fuel mileage is great!!!!!! buy this tractor!!!! Greenway John Deere took very good care of me Sam Myers the salesman was great very honest. Everybody at greenway are the best for being non pushy and very knowledgeable about the agri field
micah
- Desde: Malvern, AR, USA
Workhorse
Have owned this machine over a year. Have a acreage that I use it at. I have tested this tractor to it's limits and have been very satisfied. I finish mow and box blade my driveway.
Dhunter
- Frecuencia de uso: Mensual
- Nivel de experiencia: Intermedio
Battery replacement
Trying to replace battery is nearly impossible for one person to accomplish. It is like the design was purposefully done in such a way requiring two people just to change battery and replace brackets holding battery in place.
Survivor711
- Desde: San Antonio
- Frecuencia de uso: Mensual
- Nivel de experiencia: Intermedio
the 3032e is a power house packed in to a little tractor
i just bought a 3032 e and im very happy with this product the hydrostatic drive is excellent as my wife runs this unit with ease the front wheel assist also is very handy has already got me out of a couple soft spots on the yard
3032e
- Desde: Wilkie, SK S0K, Canada
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
Absolutely Awesome
Had my 3032 for one year now and it has not failed to handle any task I've put it to, either at home or on the deer lease. Extremely easy to operate and I'd recommend this tractor to anyone looking to get one.
countryboy08
- Desde: West Monroe, LA, USA
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
Best ranch investment we've ever made!
We bought the 3032E and it has made our workload much less strenuous and time-consuming. The size is perfect, can go in and out of 6 ft. gates easily, turning radius is spectacular and very easy to operate and maintain.
sejolly
- Desde: Prosper, TX, USA
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
First tractor owned
I have owned my JD 3032E around d a month now and have already pt 32 hours on it. I am very happy with the power and agility of this model. The bucket and box blade were perfect implements for what I need to do around my property.
Bobby20
- Desde: Carolina del Sur
- Frecuencia de uso: Semanal
- Nivel de experiencia: Principiante
Little green bullant
3 years old flourless, brought it from glenmac in lilydale awesome deal awesome tractor fixed nothing done everything and I push it to the limit all the time, wife loves it she can load the ute like a pro with the 305 loader. Turn our 10 acre 20 degree property from thick scrub/ forest into a beautiful park, turned the front wheels around and added 4in wheel spacers to the rear wife dose her tricks I do the stunt and our John Deere 3032e dose everything perfictly defiantly one of my smarter decisions cheers
Thelastcowboy
- Desde: Badger Creek VIC 3777, Australia
- Frecuencia de uso: Diario
- Nivel de experiencia: Intermedio
The Little Tractor that Could
Bought the tractor in early 2012 and have loved it ever since. I haven't come across a job it hasn't been able to do yet. I have ten acres with a barn and riding arena and it makes life so much easier. The forward and reverse pedals have taken some getting accustomed to but once I did I was off and running. Between shredding, hauling manure and dragging the arena the little tractor as had more than enough muscle to do the job and all while being very economical on the fuel usage. It pulls my 500 gallon water wagon around my sand arena with no problems. All in all, I am very pleased with the tractor.
wacocowboy
- Desde: Waco, TX, USA
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
Very good tractor, very pleased with it
I bought a 3032e in 2010, I have 10 acre tract, and my neighbor used my tractor to brush hog his (22 acre), easy to ride, very comfortable, I have like 800 hours and runs like brand new, dig two small ponds with it and did a great job, I purchased a package with auger and box blade, my neighbor broke the auger because he was digging in rock, I am very please with it, I just wanted a back hoe attachment and not sure if is going to be a good idea because the housing is aluminum and I heard won't stand the backhoe..
SamuelGuajardo
- Desde: Houston
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
Love this tractor
Easy to drive. Enough power. Does the job. Many attachments available. Great dealer support.
Jill
- Desde: Wisc
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
This is a Awesome Tractor
I am so amazed at what I call my Green Baby....this tractor is amazing to be a smaller tractor, I grew up on my Grand Daddies farm and was raised on John Deere farming, I have cleaned acreage and have accomplished more than what I expected out of a smaller tractor than I could have ever dreamed! It is so simple and easy to drive a child could do it....It is a tuff and efficient and I am proud to be a part of the John Deere heritage I was raised on! This new series is the Bomb! The dealer we purchased her through in Mershan at Ag Pro are a great bunch to deal with!
GreenBaby65
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
Bought new 2011
Used many tractors growing up, mostly MF. First JD and love it. Didnt think I could afford a JD and priced a Kubota of equal horsepower and JD beat the price. Already had many attachments, added a loader to the 3032e, cleared approx. 4 acres, pushed and dug up trees. I've put 400hrs since new on this little beast. Dont let the size fool you, it is an awesome tractor. Be careful on slopes, not a big foot print but going straight up and down I think it could climb any mountain, I know I'm a little biased. The hydro is great, my wife even likes driving the tractor. I cut my lawn with the tractor using a finishing mower. I know cut my yard and my neighbors both are approx. 6 acres. His yard is so steep a regular mower will not work, but with the 3023e 4x4 I can cut it with no problem. It is light enough working around the creek bottom that it wont sink like heavier tractors, and my tires are not weighted but I might get them filled. If your looking for a good tractor and not wanting to break the bank take a look at this one. I'm not a dealer just love my tractor.
rickster506
- Desde: Canton, GA, USA
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
Excellent tractor
I bought mine in 2010, a packet with brush hog, post hole digger and box blade, good power, front loader very nice, works excellent, hasn't give me any troubles, easy to drive, no complaints, I have 11 acres, good size of tractor for the land. I would recommend it, this model doesn't have fold able ROPS, but I don't need them, I have a canopy, when I go though low branches is a little problem, but it's ok,
SamGuajardo
- Desde: Texas, USA
- Frecuencia de uso: Semanal
- Nivel de experiencia: Principiante
GREAT UNIT FOR THE MONEY
Just purchased the 3032e from my local dealer. Great experience with the dealer made for a good start. 0 % financing option on my balance helps as well. Put tractor and loader through its paces when I got it home. Everything was a pleasant surprise. All the features you need and not a lot of fluffy extras. Power steering, hydra drive, 4x4, loader. There are some key benefits to the "r" model but many are not needed by most users. We will see how it holds up but quality looks great, as good as any I looked at and better than all of the Chinese or India imports. My first GREEN tractor and so far I'm a big fan.
Freetrapper
- Desde: Kansas
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
2020 JOHN DEERE 3032E WORKHORSE
I recently purchased my new John Deere 3032E from my local dealer. I spent approximately 6 months researching the different models starting out with the 1 and 2 series tractors. The tractor has performed flawlessly. The front end loader and attachments are easy to operate and change from the bucket to the pallet forks. The rear hitch with the Imatch system is a great improvement. I was leaning towards a 3025E for sometime but decided to go with the higher horsepower model and I am very glad I did. The John Deere MX5 rotary cutter works perfectly with the 3032E. I highly recommend checking out the John Deere 3032E before making a purchase.
jp3032
- Desde: Florida
- Frecuencia de uso: Semanal
- Nivel de experiencia: Intermedio
My 2013 - 3032e is one fine piece of equipment .
800 hrs. and going strong. Comfortable to operate for hours at a time. There's no job it can't handle.
Snakester
- Desde: Dinwiddie , va 23841
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto
Very pleased with my 3032E at 18 hours of operation
So far I have 18 hours on my 3032E and I am very pleased with my purchase. I got the 305 loader and the BB2060 box blade for doing small farm/ landscaping work in central Arizona. The tractor has plenty of pulling power with the 4wd, and the 5 foot loader and box blades makes short work out of dirt and moving debris. The tractor is very steady, drives solid and feels like a real working machine. So far I have no complaints or problems. With the power steering, comfortable adjustable seat, ease of the forward/reverse levers and the hydraulic loader controls, this tractor can keep you working all day long with no fatigue. I simply love it. The only problem I have noticed is that I run out of work for it to do! I could spend hours driving this thing!!! I have driven tractors for 30+ years- large and small.
F16DCC
- Desde: Wittmann, AZ
- Frecuencia de uso: Semanal
- Nivel de experiencia: Experto
Great!
I bought a 3032e seven years ago. It now has over 1000 hours of very, very hard use with only a few problems. It is one tough little tractor! I like it so well I'm considering buying another!
andyg
- Frecuencia de uso: Diario
- Nivel de experiencia: Experto