DS30 Dry Nutrient Spinner Spreader Box
- John Deere
- Sprayer Chassis
Buscar sucursal más cercana
Buscar ubicación
Características y especificaciones
- En tan solo 4 horas, convierta su pulverizadora autopropulsada en un aplicador para 3 temporadas.
- Aplique hasta 10 toneladas de fertilizante, con cobertura de distribución de hasta 105 pies de ancho, entre un 25 % y un 50 % más que las principales empresas de la competencia
- Aplique dos productos a la vez a dosis predeterminadas o variables, lo que disminuye el tiempo que pasa en el campo, la compactación y el combustible.
- For 612R and 616R Sprayers (300 cu ft. capacity)
- Spreader Material 304 or painted 409 stainless steel
- Capacity without second product bin 300 cu ft (8,5 m3)
- Product Spread Fertilizante seco
- Spread Pattern width with single-product bin 60 to 105 ft (18,3 to 32 m)
- Second Product Bin Opcional
-
Compatible Series
612R, and 616 Self-Propelled Sprayers and 600R Dry Spinner Spreaders
NOTE: Must use DS20 with 28-cm (11-in.) gate height for lime applications on 612R/616R/600R only.
- + Expandir todo
- - Cerrar todo
-
John Deere Connected Support™ prevents downtime and efficiently resolves issues with revolutionary technology-based solutions
When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That's why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly-in the cab or anywhere you are.
John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.
With your permission, John Deere Connected Support:- Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
- Saves time by remotely viewing in-cab displays, reducing trips to the machine
- Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
- Connects experts with the information needed to respond to downtime faster and prevent it altogether
With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.
-
Deliver accurate rate control with integrated SpreadStar™ dry rate control system
The SpreadStar dry rate control system is a standard feature that is integrated into the design of the self-propelled spreader chassis (not a third-party ISO control add-on) and delivers accurate and consistent on-target rate control. All dry spreading and vehicle functions are displayed on the Gen 4 4600 CommandCenter display for easy operation and setup. In addition to these functions, all precision technology can be used on the same display for complete integration and ease of operation. The engine, chassis, dry spreader system, and precision controllers provide central communication through the display for many vehicle and dry system functions that are simple and easy to use.
- Provides superior rate control, response times, and ease of use
- Rate control locks on to the desired application rate much more quickly and maintains it better than third-party controllers
- Easy to understand and simple to set up the key values you must enter to execute the spreading job
- No cross reference to nodes or a task controller like other third-party systems
- High-speed hydraulic pulse-width modulated control valve varies conveyor shaft speed to produce only the required product flow with easy-to-follow feed rate calibration procedures
Engine, transmission, and hydraulic drive pump work together to optimize efficiency of the entire system, providing fuel savings and optimizing power to the ground and delivery of product to the spinners.
-
Pantalla CommandCenter™ Generation 4 con sistema SpreadStar™
400 and 600 Series Sprayers and Dry Spinner Spreaders utilize the 4600 CommandCenter and SpreadStar controller allowing integrated control with the machine and dry spinner spreader.
The CommandARM™ controls, Gen 4 CommandCenter display, and SpreadStar have been updated and tailored to the needs of operators allowing them to see all key functions on one run screen including AutoTrac™ assisted steering system, variable rate documentation, field totals, and dry spinner spreader settings.
The Gen4 CommandCenter display allows operators to set up and apply single or dual products, utilizing variable rate map-based prescriptions with John Deere Section Control functionality. Haga clic en cualquier parte de la pantalla para ampliar y ajustar fácilmente la información.Para preparar la aplicación en el terreno, simplemente oprima el botón Setup (configuración) en la esquina inferior izquierda de la página de ejecución de la pantalla y el sistema redirigirá al usuario a la pantalla Work Setup (configuración de trabajo).
- Select the Location box to setup operator information including farm, field, and Operator information is not required to load and execute a variable-rate prescription.
- Seleccione la pestaña Equipment (equipo) para completar la configuración inicial de la máquina e incluya la cantidad de tolvas en el pulverizador centrífugo de material seco.
- La pestaña Work Summary (resumen de trabajo) muestra un enlace a cada tolva del pulverizador centrífugo. La captura de pantalla de arriba corresponde a un sección de dos tolvas de material seco. Seleccione cada una para ingresar o cambiar el nombre del producto que se esparcirá. Up to 24 unique names can be entered into the display for various product types such as single product, blended product, or multi-product variable rate. The operator can also choose the target rate for spreading or load a variable-rate prescription.
Once the Work Setup window is complete, the updated SpreadStar application can then be used to input and setup the following:
Dosis de pulverizado deseada: seleccionar la opción de dosis deseada permite al operador ajustar rápidamente tres tasas diferentes o cargar una indicación si es necesario. Las tasas deseadas pueden ajustarse al pulverizar con los botones en CommandARM.
Densidad de producto/Producto aplicado: seleccionar cualquiera de estas opciones redirigirá al usuario a la página de detalles para las tolvas, donde con más frecuencia se hacen ajustes e ingresan datos del pulverizador centrífugo de material seco. En el caso de los pulverizadores centrífugos de material seco con múltiples tolvas, las pestañas individuales en la parte superior de la pantalla facilitan pasar de una a otra con rapidez.
Las funciones en la página de detalles para las tolvas son las siguientes:- Tolva abierta/cerrada
- Modo de cambio entre tolvas (no se muestra)
- Densidad del producto
- Valor CFR
- Apertura de la compuerta de suministro
- Alarma de la tolva
- Restablecer el contador de la tolva
- Preparación de la banda transportadora
Configuración del centrifugador
El último paso es configurar el centrifugador. Para ello, haga clic en la pestaña Spinner Settings (configuración del centrifugador) en la aplicación SpreadStar. Se mostrará la ventana de programación del centrifugador agregado y el operador podrá elegir allí una nueva programación.
Las funciones de programación incluyen lo siguiente:- La velocidad deseada para el centrifugador
- Las alarmas de velocidad deseada del centrifugador
- El ancho de extensión
- Configuración del bastidor del ventilador
Los detalles de la tolva y la configuración del centrifugador se guardan en los detalles de la sección Work Summary (resumen de trabajo). For example, an operator with a two-bin dry spreader may need to change between a two-product variable rate to a single blend application using bin chaining. When the operator switches back to two-product variable rate, SpreadStar automatically remembers the bin details and spinner settings that were last used with that configuration.
Aún con esta función, es importante calibrar el pulverizador centrífugo de material seco cuando se cambien productos, para garantizar un patrón de pulverizado preciso y uniforme.
-
New Leader® Dry Spinner Spreader offers maximum versatility
Get three-season flexibility from your application equipment with the New Leader DS20 or DS30 Dry Spinner Spreader.
The DS20 offers of up to 5,6-m3 (200 cu ft), or 6,6 tons, of dry fertilizer, while the DS30 bumps capacity to 8,5 m3 (300 cu ft), or 9 tons, of dry fertilizer. Both models feature:
- Four-hour conversion from a liquid-application setup
- Variable-rate application ranging from 34 kg/ha (75 lb/acre) to 3 tons/acre
- Spread width of up to 32 m (105 ft) thanks to the 1,83-m (72-in.) spinner height
- New Leader G4 spinner technology for a consistent spread pattern and more uniform application
- Single or dual product bins in 304 stainless or 409 painted spreader construction with #4 belt-over-chain conveyor
Dry Spinner Spreader compatibility chart
DS20 with 12,7-cm (5-in.) feedgate (not approved for ag lime)
DS20 with 28-cm (11-in.) feedgate (ag lime compatible)
DS30 with 12,7-cm (5-in.) feedgate (not approved for ag lime)
DN495
408R
X
---
---
---
410R
X
---
---
---
412R
X
---
---
---
612R
X
X
X
---
616R
X
X
X
---
400R
X
---
---
---
600R
X
X
X
---
800R
---
---
---
X
New Leader es una marca comercial de Highway Equipment Company.
-
New Leader® boxes are designed to be MultApplier ready
El accesorio opcional MultApplier de acero inoxidable 304 ofrece flexibilidad para la máquina, ya que se puede solicitar que se instale en la fábrica o en el terreno para la aplicación de dos productos. Las compuertas traseras con pasador y los acoples de acero inoxidable permiten que el pulverizador centrífugo de material seco pueda pasar de una configuración apta para la aplicación de dos productos a una apta para la aplicación de un solo producto. The DS20 MultApplier insert has a Bin 2 stuck capacity of 1,9 m³ (66 cu ft), offsetting the capacity of Bin 1 to 3 m³ (106 cu ft). The DS30 MultApplier insert has a Bin 2 stuck capacity of 3 m³ (106 cu ft), offsetting the capacity of Bin 1 to 4,59 m³ (162 cu ft).
The dual hopper system features two independent conveyors that can simultaneously apply up to two products at predetermined rates or variable rate application with swath widths up to 25 m (84 ft), decreasing time in the field, soil compaction, fuel consumption, and increasing return on investment..
New Leader es una marca comercial de Highway Equipment Company.
-
Wide spread widths are available with the New Leader® Dry Spinner Spreader
The DS20 and DS30 provide up to 32-m (105-ft) spread widths and the adjustable spinner assembly allows for quick, accurate settings during variable-rate applications, broadcasting materials farther and wider with consistent spread patterns, and producing industry-leading productivity.
Depending on product a F4365 with 1,38-m (54-in.) spinner height, can achieve spread widths from 18,92 to 27,43 m (60 to 90 ft), but with the increased clearance of 1,74 m (68 in.) the 400R and 600R Dry Spinner Spreader can achieve spread widths from 21 to 32 m (70 to 105 ft). Added spread width increases the number of acres per day and decreases the number of passes, which also reduces fuel costs and compaction.
By maintaining spread width, operators can consistently place product throughout the fields and prevent bottlenecking of product at the row end.
With a full spread pattern and reduced overlap through integrated technologies such as AutoTrac™ automated steering and John Deere Section Control, the 400R and 600R Dry Spinner Spreaders allow for full product coverage while reducing input costs from overlap.
Additionally, by combining the John Deere 400R or 600R Dry Spinner Spreader chassis and the New Leader dry spinner spreader, operators can maintain spread widths even when rpms are reduced. El sistema hidráulico de presión y caudal compensados de John Deere permite a los operadores mantener la velocidad de centrifugado en cada pasada sin sacrificar la uniformidad en el ancho y patrón de distribución. Esta mayor altura permite cubrir una trayectoria más amplia a una menor velocidad de centrifugado y tiene capacidad para aplicaciones en temporadas posteriores.
NOTE: With differences in fertilizer density, size, and crush strength a spread pattern test is the only way to measure a product's true spread width and pattern.
New Leader es una marca comercial de Highway Equipment Company.
Application system
Second product bin | Opcional |
Conveyor system | #4 belt over chain |
Product spread | Fertilizante seco |
Spreader material | 304 or painted 409 stainless steel |
Compatible series | 612R and 616R Self-Propelled Sprayers and 600R Dry Spinner Spreader NOTE: Must use DS20 with 28-cm (11-in.) gate height for lime applications on 612R/616R/600R only. |
Capacidad
Capacity with second product bin | 4,59 m3 162 pies cúbicos |
Capacity of second product bin | 3 m3 106 pies cúbicos |
Capacity without second product bin | 8,5 m3 300 pies cúbicos |
Dimensiones
Body length | With spinner frame 437,5 cm 172 in 335,3 cm 132 in |
Body height | 174,7 cm 68,77 pulgadas |
Body width | With spinner frame 321,6 cm 127 in 304,8 cm 120 in |
Feedgate height | 12,7 cm 5 in |
Body length of second bin insert | 152,4 cm 60 in |
Especificaciones clave
Spreader material | 304 or painted 409 stainless steel |
Second product bin | Opcional |
Product spread | Fertilizante seco |
Spread pattern width with single-product bin | 18,3 to 32 m 60 a 105 pies |
Capacity without second product bin | 8,5 m3 300 pies cúbicos |
Compatible series | 612R and 616R Self-Propelled Sprayers and 600R Dry Spinner Spreader NOTE: Must use DS20 with 28-cm (11-in.) gate height for lime applications on 612R/616R/600R only. |
Feedgate height | 12,7 cm 5 in |
Capacity with second product bin | 4,59 m3 162 pies cúbicos |
Spinner
Fins per disk | Cuatro |
Disk diameter | 61 cm 24 in |
Spread width range
Spread pattern width with single-product bin | 18,3 to 32 m 60 a 105 pies |
Spread pattern width with second-product bin | 18,3 to 25,6 m 60 a 84 pies |
Peso
Second product bin weight | 508 kg 1120 lb |
Estimated spreader weight | 1696 kg 3740 lb |