StarFire 7000 Integrated Receiver on John Deere 400 and 600 Series Sprayers and 800R Floaters

The StarFire 7000 Receiver is the latest addition to the suite of Precision Ag Technology from John Deere. The StarFire 7000 Receiver offers greater accuracy, faster pull-in times, and season-to-season repeatability. This means less hardware, faster times recovering from a shading event, and the confidence that your guidance lines and boundaries do not shift from year to year. The integrated design further enhances the value that you have come to expect from StarFire products.

Similar to the StarFire 6000 Integrated Receiver, the StarFire 7000 eliminates all setup, installation, and calibrations. There is no need to verify machine and receiver measurements, as this has been done precisely for you at the factory. You will spend 60 minutes less per receiver move each season, which gives you more time to focus on other parts of your operation.

With updated Ethernet connectivity, software updates are easier and faster. StarFire 7000 Integrated Receiver maintains the speed to update software in under 4 minutes while remaining in the cab. Over-the-air updates are 85 percent faster with the StarFire 7000 Integrated Receiver because of Ethernet connectivity.

Benefits to the StarFire 7000 with SF-RTK

• 5-year repeatability
• 10-minute pull-in time
• 2,5-cm (1-in.) pass-to-pass accuracy
• Drop-in replacement for StarFire 6000 Integrated Receivers

To learn more about the StarFire 7000, visit the StarFire 7000 page.

When staring down a string of 2,000-acre days, equipment isn't the only thing that needs to be operating at peak performance - operators need to be at their best, too. That's why John Deere put together a range of packages to give you just the right features to keep operators comfortable and efficient.

Ultimate Comfort and Convenience cab

For corner-office comfort that can help make short work of the longest days, take a look at the Ultimate Comfort and Convenience package. The heated, ventilated ActiveSeat™ II seat isolates the operator from up to 90 percent of vertical movement and comes in leather with massage functions. The Ultimate package also provides a premium XM® ready sound system with subwoofer, a leather-wrapped steering wheel, a refrigerator, and more.

The following table gives a quick reference of what is contained in the Cab Comfort and Convenience packages.

Some of the features in the chart above are also available as attachments. There are also many options for mounting a variety of monitors, tablets, and phones.

NOTE: Bluetooth where certification allows.

The Ultimate Comfort and Convenience package offers an ActiveSeat II seat with 24 degrees of left-hand seat swivel, as well as an additional 9 degrees of right-hand seat swivel for easier operation. It also includes a leather-wrapped steering wheel, carpeted floor mat, and is a prerequisite for the Signature Edition, unique from the Premium package. The heating, ventilation, and air conditioning (HVAC) system location has also moved to provide a more enjoyable, quiet ride.

Características:

• ActiveSeat II suspension, leather, pneumatic lumbar support, massage, electronic seat controls, adjustable bolsters, 24-degree right-hand seat swivel, and 24-degree left-hand seat swivel
• Heated, ventilated, and massage functionality with the leather seat
• Operator presence system that warns if the operator is out of the seat while operating key functions CommandARM console with integrated controls
• 21,3-cm (8,4-cm) 4200 or 26,4-cm (10,4-cm) 4600 Generation 4 CommandCenter Display
• Left-hand ceiling storage compartment
• Refrigerator located on the left side behind the instructor seat
• Puerto de datos Service ADVISOR™ 
• Volante inclinable/telescópico con memoria de posición
• Swing-out rear window
• Right and left outside mirrors (manually adjustable mirror head)
• El monitor se instala en el poste delantero derecho y en el poste trasero de la cabina 
• Premium sound system, including touchscreen radio, smartphone interface, AM/FM, aux and Bluetooth wireless with voice control, inputs, XM ready, six speakers with one subwoofer, and business band ready
• Laminated windshield glass and dark tint on rear windshield glass
• Air conditioner and heater with automatic temperature controls
• Three 12-V convenience outlets (cigarette lighter style)
• Six 12-V three-pin outlet with adapter (provides switched and unswitched power)
• Five charging USB ports
• 120-V AC power outlet
• One International Organization for Standardization (ISO) nine-pin connector
• Múltiple con adaptador para toma de conexión rápida
• Pantalla digital esquinera con:
  • Indicador de nivel de combustible que incluye advertencia de nivel bajo de combustible
  • Indicador de temperatura
  • Indicador de nivel de fluido de escape diésel (DEF) que incluye advertencia de nivel bajo de DEF
  • RPM del motor
  • Marcha o velocidad controladas por transmisión
  • Vehicle system functions
• Portabebidas con tamaño adecuado para distintos envases
• Interior dome light in the ceiling
• Map lights

ActiveSeat II seat provides a smoother ride

ActiveSeat II and controls

NOTE: The John Deere ActiveSeat II is only available in the Ultimate Comfort and Convenience package.

The John Deere Active Seat II utilizes an electrical control system to control the vertical seat top movement. The "active" control system minimizes vertical seat top acceleration by sensing vertical sprayer inputs and actively positioning the seat top to cancel those inputs. This results in a significantly smoother ride for the operator.

The system utilizes an electric motor on the center pivot working in parallel with an air spring. The purpose of the air spring is to support the operator while the electric motor dynamically positions the seat.

Two sensors are integrated into the seat suspension and are used for inputs into the electric motor control system. The accelerometer, which is integrated into the onboard control unit (ESU), measures seat top acceleration. The position sensor, mounted at the scissors hinge, measures vertical seat top position. The electronic controller uses these two signals in a control algorithm to determine the proper torque and motor speed commands to send to the electric motor to control vertical seat movement such that the vertical acceleration at the seat top is minimized.

The John Deere ActiveSeat II also has a ride firmness switch. The ride firmness switch is located on the left-hand armrest and replaces the suspension shock-dampening seat attenuation lever on the front right-hand side of the seat controls.

El interruptor de firmeza tiene tres posiciones: más, menos y media. Las tres posiciones proporcionan tres niveles diferentes de rendimiento del asiento:

• La posición "más" proporciona el mayor grado de firmeza. This position allows more of the sprayer's inputs to be felt by the operator (slightly rougher ride).
• The minus position provides the least degree of ride firmness, allowing minimal sprayer inputs to reach the operator, resulting in maximum seat performance.
• La posición media permite un equilibrio entre los ajustes más (+) y menos (-).

The ActiveSeat II is heated and ventilated leather seat for increased comfort and easier cleaning. This is only available with the Ultimate Comfort and Convenience package. ActiveSeat II allows for increased overall comfort and productivity.

The leather seat includes massaging capability to alleviate operator fatigue.Right-hand seat swivel is 24 degrees to the left and 24 degrees to the right.

Visibility packages

Model year 2022 and newer Ultimate lighting

Model year 2021 4 Series light-emitting diode (LED) lighting

When the long days turn into long nights, visibility becomes imperative to operator safety and overall productivity. The Ultimate Visibility package provides a full 360-degrees of powerful LED cab lighting, a clear view all around the machine, and eight additional LED service lights to illuminate critical service areas.

The following table is a quick reference of features included in each Visibility package.

Bluetooth is a trademark of Bluetooth SIG, Inc. XM is a trademark of Sirius XM Radio, Inc.

Gen 4 display in the 800R

Pantalla de ejecución

The 800R utilizes the 4600 CommandCenter™ Display that is also found in other John Deere large ag equipment today. The CommandARM™ controls, Generation 4 CommandCenter display, and the New Leader ISO VT (International Standards Organization Virtual Terminal) have been updated and tailored to the needs of operators. This combination allows operators to see all key functions on one run screen including AutoTrac™ assisted steering system, variable rate documentation, field totals, and dry spinner spreader settings. Haga clic en cualquier parte de la pantalla para ampliar y ajustar fácilmente la información. 

Hybrid ISO VT integration

This improved user experience allows the operator to set up, monitor and control the dry spreader much easier and quicker than previous model years. For model year 2022 on the 800R, the operator's experience has been enhanced in the following ways:

• The spreader controls have now been moved to the CommandARM, Gen 4 display, and multi-function lever
• Improved integration of the New Leader ISO VT that uses the Ag Leader Dry Rate Control system:
  • Optional John Deere Gen 4 QT run page set up
  • Optional New Leader ISO VT quarter page run page set up

Operators can press anywhere (highlighted in yellow) to open their New Leader VT settings

Once selected, the window opens to allow operators to make changes in full screen view

Work setup on the DS35

To prepare for field application, simply press the setup button in the bottom left corner of the display run page, and it will direct the user to the work setup window. Work setup is identical for all bin configurations.

1. Select the location box to setup user information including farm, field, and client. User information is not required to load and execute a variable- rate prescription.
2. Select the equipment box to do the initial setup of the machine including the number of bins in the dry spinner spreader.
3. Seleccione cada una para ingresar o cambiar el nombre del producto que se esparcirá.  Enter 24 unique names into the display for various product types such as single product, blended product, or multi-product variable rate. The user can also choose the target rate for spreading or load a variable- rate prescription.

Dry Rate Controller on the DS35

Once the work setup window is complete, the updated rate control application can then be used to input and setup the following:

Tasa de pulverizado deseada

Target spread rate - Selecting the target rate box allows the operator to quickly adjust three different target rates or load a prescription if needed. The target rates can be adjusted when spreading by changing the rates within the New Leader ISO VT Run Page.

Detalles para la tolva

Product density/product applied - Selecting either of these areas will take the user to a bin details page where more frequent dry spinner spreader inputs and adjustments are made. For dry spinner spreaders with multiple bins, individual tabs at the top of the screen make it easy to quickly toggle between bins.

Features on the main ISO VT run page include:

• Feed gate height setting
• Apertura de la compuerta de suministro
• Alarma de la tolva
• Spinner speed
• Bin volume
• Densidad del producto
• Target rate and actual rate
• Rate increase and rate decrease
• Conveyer speed
• Manual belt mode
• Section status (G5 only)
• Edge spread status

Display shows bin status

New Leader es una marca comercial de Highway Equipment Company.

Ultimate Comfort and Convenience package

Ultimate Comfort and Convenience package

John Deere Signature Edition badge

To make the most powerful John Deere options available in one cost-effective package, 800R models can be ordered with the John Deere Signature Edition.

Marked with an exclusive badge only available on the Signature Edition, this package includes:

• Ultimate Comfort and Convenience package
• Ultimate Visibility package
• ActiveSeat™ II equipment
• JDLink™ five-year subscription
• Premium 3 or Automation 4 activation
• 4G LTE connectivity hardware

 
Get all the top-of-the-line comfort features and technology options in one special edition: the John Deere Signature Edition.
 
Part solutions are available through John Deere to resolve unique mounting configuration needs.

800R applying with the LS20 Liquid System

Seasonal flexibility is crucial for maximum machine utilization. LS20 Liquid System option maximizes the seasonal capabilities of the 800R. Together with Hagie™ Manufacturing, this liquid system is designed as a complete package with industry-leading advantages. Learn more on the LS20 product page.

Accurately apply low-rate herbicide and high-rate fertilizer with a single machine

LS20 applying in the field

During the busy spring season, you need to complete jobs as crops are planted, from applying high-rate fertilizer on unplanted corn fields to low-rate pre-emergent herbicide on soybeans. Dual centrifugal solution pumps with dedicated magnetic flow meters work together to achieve pin-point rate accuracy through the entire flow range between 18,9 and 1.589,9 L/min (5 and 420 gpm).

Fast, clean, automated tank filling enabled by PowrSpray™ technology

LS20 load system keypad

When the tank is empty, every second counts trying to get back into the field. PowrSpray features independent fill and spray circuits with dedicated pumps to maximize flow. The dedicated self-priming transfer pump can fill the solution tank at over 1.135,6 L/min (300 gpm).

This PowrSpray system can:

• Automatically fill to a predefined tank level while automatically adjusting engine speed
• Pull fresh water from the rinse tank to clean the fill system
• Be manually reduced if a slower fill rate is desired
• Pause filling, giving you sufficient time to add ingredients and rinse containers
• Allow for quick and easy operation at the load station for all skill levels

Cover more acres per pass using the widest factory-installed boom

LS20 boom

The time-proven 27,4-m (90-ft) sprayer steel boom unlocks reliable productivity for ag service providers. This durable boom features:

• Full-boom breakaway
• Tridirectional boom tip breakaway
• Auto-fold

The standard dual plumbing system features 76,2-cm (30-in.) off-center high-flow nozzle bodies (turrets) and a 152,4-cm (60-in.) on-center cam-lock. When configured for 152,4-cm (60-in.) cam-lock spacing, the effective spray pattern is 29 m (95 ft). The 76,2-cm (30-in.) nozzle body configuration achieves a 27,4-m (90-ft) spray pattern.

Cover more acres between refills with the large solution and rinse tanks

LS20 solution and rinse tanks

With higher-speed planting, the season is becoming more condensed every year. When you need to get acres covered, getting tender trucks back to the plant increases productivity. To hold more product onboard, the LS20 solution system features a stainless-steel 7.570,8-L (2000-gal.) solution tank and black poly 757,1-L (200-gal.) rinse tank.

The large solution tank allows operators to cover more acres between refills. This tank gets tender trucks empty faster and back on the road, translating into less idle time for the tender truck and you and quicker load turnarounds.

Hagie is a trademark of Hagie Manufacturing Company and similar to John Deere branded equipment, Deere will also support Hagie equipment.

Doble chasis de canal en C

The 800R uses a dual c-channel frame design with leaf spring suspension to maximize ride quality and durability. Si bien el diseño de doble bastidor de canal en C es muy resistente, tiene un nivel de flexibilidad.  This is especially important when operating in rough field conditions at higher speeds because the frame flexes and absorbs some of the impact loads instead of transferring it to the rest of the machine including the operator.

Eje trasero

Industry-proven AxleTech® axles are used on the front and rear and are designed to haul full loads of heavier-density products such as lime.

Eje frontal con suspensión de ballestas parabólicas

Eje trasero con suspensión de ballestas parabólicas

Las ballestas parabólicas se usan en el eje delantero junto con amortiguadores, y ofrecen una suspensión con 102 mm (4 in) de recorrido, que es la mejor de la industria.  Las ballestas parabólicas tienen pocas hojas, lo que reduce la fricción interna y permite mejor compresión y articulación. 

Las ballestas parabólicas de doble horquilla se usan en el eje trasero para garantizar un recorrido uniforme independientemente de la cantidad de producto que haya en la caja.  El primer juego de ballestas parabólicas más pequeñas se usa cuando la caja está vacía.  Cuando la caja está llena, el primer juego de ballestas parabólicas se interconecta y combina integralmente con el segundo juego de ballestas parabólicas más grandes.  This design helps the 800R drive and ride more consistently when applying in the field or in transport on the road.

El diseño de doble bastidor de canal en C, junto con la mejor suspensión de su clase, ayuda a absorber los impactos y a proteger al operador y a la máquina de vibraciones dañinas.  Less vibration improves productivity by reducing operator fatigue and decreasing the potential for failures caused by them.

Compartimento de almacenamiento

Increased external storage capacity

Increased external storage capacity

The external storage compartment is triple the size of the F4365 machines. The storage box can be used to store important items nearby, but outside the cab:

• Equipo de protección personal (PPE), como por ejemplo, guantes, gafas protectoras, protector facial, delantal y vestimenta para emergencia
• Pistola engrasadora
• Herramienta de verificación de densidad
• Herramientas

Escalera plegable hidráulica

Escalera plegable hidráulica

Escalera plegable hidráulica

Operators can climb into the 800R via a hydraulically controlled front ladder similar to 4 Series Sprayers. When the machine starts to move, the ladder automatically folds up. Cuando la máquina se detiene, el operador solo debe oprimir el botón de la escalera en el centro de control CommandARM™ para desplegarla. 

Plataformas de la cabina y del pulverizador centrífugo de material seco

Plataforma del pulverizador

Esta exclusiva característica de la industria permite al operador salir de la cabina y caminar hacia el pulverizador centrífugo de material seco para ayudar con la entrega del producto o verificar su densidad. 

Puntos delanteros de liberación

Puntos delanteros de liberación

If the machine gets stuck while operating in wet conditions, retrieval points are located on the front of the frame to assist in pulling the machine out.

Guardabarros y solapas guardabarro

Guardabarros delantero

Solapas guardabarro traseras

Front and rear fenders protect the 800R from mud and debris when operating in the field. Large front fenders similar to those used on large row-crop tractors protect the front of the machine, even when turning. Rear mud flaps that are attached to the dry spinner spreader platforms on the right and left side provide excellent protection from debris thrown by the rear tires.

Óptima distribución del peso

AxleTech is a trademark of AxleTech International IP Holdings, LLC.

Connected Support technology

When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That's why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly-in the cab or anywhere you are.

John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.

With your permission, John Deere Connected Support:

• Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
• Saves time by remotely viewing in-cab displays, reducing trips to the machine
• Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
• Connects experts with the information needed to respond to downtime faster and prevent it altogether

With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.

Pulverizador centrífugo de material seco New Leader® 

The 800R uses an industry-proven New Leader Dry Spinner Spreader. This 4,27-m (14-ft) long dry box can hold 9,34 m³ (330 cu ft) of product and is available in multiple configurations to meet a variety of application needs. Según el tipo de producto, el ancho de distribución puede ir de 18,3 a  27,4 m (de 60 a 90 pies). 

Opción de tolva individual 

Opción de tolva individual 

The single bin option can be ordered in a 304 stainless steel or a 409 painted stainless steel. A removable end gate, inverted V, and electric oiler come in base. A una velocidad de 24 km/h (15 mph), la tolva individual puede distribuir el fertilizante a tasas de nada menos que 499 kg (1100 lb) por acre o repartir cal agrícola a tasas de nada menos que 2994 kg (6600 lb) por acre. 

Accesorio MultApplier

Accesorio MultApplier de doble depósito

A 2,1-m (7-ft) 304 stainless-steel MultApplier insert can be added to the single bin to spread two products at once. The MultApplier uses a belt over stainless-steel conveyor chain, so no oil is necessary. Simplemente retire la compuerta del extremo de la tolva individual para instalar el accesorio MultApplier.

Accesorio MultiBin

Accesorio MultiBin con cuatro depósitos 

A 304 stainless-steel MultiBin insert can be added to the single bin to spread up to four products at once. Además de la segunda tolva grande, hay dos tolvas para distribución de micronutrientes detrás del accesorio MultiBin. La banda del MultiBin, similar a la del accesorio MultApplier, está sobre una correa transportadora de acero inoxidable que no necesita ser aceitada. 

El divisor que separa las dos tolvas de micronutrientes en la parte trasera también puede desmontarse para colocar una tolva grande de distribución de micronutrientes.  Los rodillos de dosificación estándar vienen como equipamiento básico con el accesorio MultiBin.  Una tapa accionada por sistema neumático cubre las tolvas con los micronutrientes y se controla mediante la pantalla CommandCenter™ Generation 4. 

New Leader es una marca comercial de Highway Equipment Company.

Motor y transmisión

9L (549-cu in.) PowerTech™ engine

Transmisión infinitamente variable (IVT™)

The 800R uses an industry-proven 9L (549-cu in.) PowerTech engine combined with an IVT to provide maximum power and efficiency. The 9L (549-cu in.) engine provides 272-kW (365-hp) rated horsepower and up to 298-kW (400-hp) peak horsepower when needed.

The IVT is common to the 8R Tractors but has been modified for higher field and transport speeds.

Velocidades del pulverizador y de transporte

800R spreading in the field

800R en transporte 

The 800R can apply product up to 48 km/h (30 mph) in field and travel on the highway empty at speeds up to 74 km/h (46 mph). El motor y la transmisión son los mismos que se ofrecen en otras líneas de productos de John Deere, lo que significa que los sitios y períodos de mantenimiento, además de las partes, también son los mismos. 

Suministro de combustible

To ensure the 800R can run all day long, it comes equipped with a 567-L (150-gal.) fuel tank and 29,5-L (7,8-gal.) diesel exhaust fluid (DEF) tank located on the right side of the machine. Los tanques delgados están adheridos al bastidor doble en C, lo que reduce la carga de la torsión que los tanques pueden tener sobre el bastidor cuando están llenos.  Ambos tanques pueden llenarse fácilmente desde el nivel del suelo. 

SprayStar spray rate control on Generation 4 4600 CommandCenter™ Display

The SprayStar spray rate control system is a standard feature that is integrated into the design of the self-propelled sprayer system (not a third-party International Organization for Standardization (ISO) control add-on) and delivers accurate and consistent on-target rate control. All spraying and vehicle functions are displayed on the Generation 4 4600 CommandCenter Display for easy operation and setup. In addition to these functions, all precision technology can be used on the same display for complete integration and ease of operation. The engine, chassis, solution system, and precision controllers provide central communication through the display for many vehicle and solution system functions that are simple and easy to use.

• Provides superior rate control, response times, and ease of use
• Rate control locks on to the desired application rate much more quickly and maintains it better than third-party controllers Easy to understand and simple to set up the key values you must enter to execute the spraying job
• No cross reference to nodes or task controller like other third-party systems
• High-speed hydraulic pulse-width modulated control valve varies solution pump speed to produce only the required solution flow in coordination with the flow meter and pressure sensor rather than a valve to restrict flow

The engine, transmission, and hydraulic drive pump work together to optimize efficiency of the entire system. This cohesiveness provides fuel savings and optimizes power to the ground and delivery of product through the solution system to the nozzles.

On model year 2022 and newer machines, the common hydraulic implement pump for the 800R chassis decreases implement changeover time by more than 50 percent and decreases hydraulic line complexity with the bulkhead. The secondary implement pump that was previously required for liquid systems, air booms, and all MultiBin and MultApplier dry spinner spreader options is not common and comes factory installed. This change to the factory machine means the following benefits:

• Reduced changeover time for combo machines to approximately 6 hours

NOTE: The single bin configurations only requires one pump and are not capable of becoming combo machines. See the compatibility chart for more details.

AB30 Air Boom on 800R Floater

AB30 Air Boom folded on 800R Floater

For ag service providers and large-scale producers, the AB30 Air Boom is available as an option for the 800R Floater. The AB30 Air Boom builds on the advantages of the 800R chassis with the addition of an 8,5-m³ (300-cu ft) dry box with dual-product capability and a 21,3-m (70-ft) wide boom.

La durabilidad y el tiempo productivo son sumamente importantes para el negocio minorista de la agricultura.  With the number of acres these machines need to cover each year and the varying weather conditions that can impact the schedule, increasing uptime is crucial to the profitability and success of the ag retailer. The AB30 Air Boom is designed to maximize uptime through improved performance, reliability, and operator comfort.

Rendimiento

Botalón neumático AB30 

The air boom option allows operators to accurately apply dry fertilizer across a wide 21,3-m (70-ft) swath at speeds up to 48,3 km/h (30 mph), and at maximum rates up to 544,3 kg (1.200 lb) per acre at 16,1 km/h (10 mph). Gracias a su tolva de material seco con capacidad de 8,5 m³ (300 pies cúbicos) y configuración de doble depósito, los operadores pueden aplicar de foma simultánea hasta dos productos a tasas variables para satisfacer mejor las necesidades de nutrientes de las semillas plantadas con menos pasadas por el terreno.  La precisión en la aplicación se puede mejorar aún más con el control de medias secciones. 

Sistema de distribución de aire

El sistema de distribución de aire tiene un diseño eficiente que permite enviar de manera uniforme el flujo de aire desde el ventilador a los botalones.  The closed-loop speed control allows the fan to run independent of the motor speed, increasing efficiency. This design requires less power for the air system and diverts more engine power to the ground during acceleration and operation.

Confiabilidad

The electrical and hydraulic systems have been designed from the ground up with full integration into the 4600 CommandCenter™ Display for easier control and maintenance. La estructura y los soportes del botalón también han sido reforzados para extender la vida útil, independientemente de cuáles sean las condiciones del terreno. 

Ventilador enfriador de aceite

Entrada con pantalla para el aire del ventilador

Para mejorar la confiabilidad del sistema de distribución de aire, el ventilador enfriador de aceite se instala sobre el lateral derecho de la máquina, lo cual lo expone a menos cantidad de polvo y a menor nivel de vibración, y a la vez facilita el mantenimiento.  También se agregó una pantalla grande sobre la entrada de aire del ventilador para impedir que ingresen partículas y residuos al sistema de aire. 

Comodidad del operador 

Handrails on both sides of the dry box

La escalera frontal ofrece un fácil acceso a la máquina incluso con los botalones plegados.  Durante la entrega de productos, los operadores pueden acceder rápidamente a la parte superior de la tolva para material seco desde la plataforma de la cabina.  Handrails can then be folded up on both sides of the dry box, allowing the operator to work more efficiently.

The 800R with the AB30 Air Boom improves the revenue potential for ag service providers by increasing machine productivity through greater durability and superior field performance.