John Deere D625, D630, and D636 Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option (double swath package).

• Larger windrows to match combine or self-propelled forage harvester
• Match narrower-width drapers with higher-capacity harvesting
• Place higher-density windrows in front of harvesters when yields are low
• Discharge two windrows side by side for uniform combine or forage harvester feeding

Primera pasada con descarga a la derecha

Segunda pasada con descarga a la derecha

Tercera pasada con descarga a la izquierda

Descarga central

D600 Draper

The D600 Series includes an improved reel that increases durability in heavy crop conditions. The dual drive offers more versatility for operators to match their crop conditions and offers more reel torque for heavy crop conditions. The system can be quickly reconfigured by changing quick couplers to offer a series configuration for a higher reel speed to meet the needs of lighter crop conditions.

The cam reel allows the reel to efficiently lift crop across the cutterbar and release it onto the draper belts.

D600 Draper teeth

• Easy reel tooth replacement is done with a 90-degree turn using a wrench. It allows the reel tooth to be removed and replaced.
• Se pueden agregar dientes adicionales en cualquier lugar de la barra dentada extruida.

D600 Draper on windrower

The draper hydraulic pump control adjusts knife, belt, and reel speeds to match the ground speed. This provides consistent feeding as you move through the field.

Correas de transmisión central

D600 Draper on W235 Windrower

• Deliver increased torque
• Enable greater productivity with minimal belt slippage
• Increase performance in heavy crop conditions

Los círculos rojos indican la ubicación de los motores de transmisión por correa.

• Draper belts on the D600 are driven from the center of the platform
  • Delivers increased belt performance compared to drapers with end-driven belts

Motores con transmisión por correas

Motor con transmisión de correa a la izquierda

Motor con transmisión de correa a la derecha

Debido a que los motores impulsan las correas (en lugar de generar un sistema de transmisión por extremos), se produce menos holgura en la correa. Esto provoca un aumento de la torsión de la correa.

As a result, producers experience minimal belt slippage and increased performance in heavy crop conditions due to the center-driven belt system.

Los equipos de apoyo de las áreas de servicio, partes y ventas de su concesionario John Deere local ofrecen entrega de partes de un día para otro, además de personal de apoyo bien capacitado.

D600 Draper and interchangeable rotary platform

D600 Draper has an interchangeable rotary platform:

• Interchangeable on W200M and R Series units in 30 minutes or less
• Growers can use one traction unit for harvesting both small grains and hay