Características y especificaciones
- Reduce service time with Quick Change Knives
- Updated design and styling
- Decreased horsepower and fuel requirements due to lighter weight1
- Easier serviceability with modular-design cutterbar
- Impeller, urethane or V-10 conditioners
- Velocidad de PTO Solo 1.000 RPM
- Ancho de corte 13 pies (4 m)
- Altura de corte 0,63 a 6,7 in (16 a 170 mm)
- Discs 8
- PTO de 1.000 RPM, 1 eje de 3/8" 100 a 150 hp (75 a 112 kW)
- PTO de 540 RPM, eje de 1 3/8" N/D
Especificaciones
Dimensiones
Neumáticos estándar | 11L-15 estándar 31x13,5L 15, 8PR |
Longitud de transporte | 8,2 m 26,9 ft |
Weight, impeller conditioner | 2,93 kg 6.470 lb With Urethane roll conditioner: 2.996 kg 6.605 lb With V-10 Steel roll conditioner: 3.086 kg 6.805 lb |
Ancho de transporte | 4 m 13 ft |
Acondicionadora con impulsores
Tracción | 3-V powerband belt and sheaves |
Tines type | V-tines |
Number of tines | 72 |
Number of speeds | Dos |
Ancho | 268 cm 106 in |
Diámetro | 59,5 cm 23,4 pulgadas |
Especificaciones clave
Optional hitch | Drawbar swivel |
Velocidad de PTO | 1000 rpm |
Enganche estándar | Rockshaft swivel |
Ancho de transporte | 4 m 13 ft |
Number of disks/knifes | 8 16 |
Cutterbar - cutting width | 4 m 13 ft |
Presión hidraúlica requerida | 15.513 kPa 2.250 psi |
1000 rpm 1-3/8 in. PTO | 95-150 hp 71-112 kW |
Rolls conditioner
Type of material | Urethane or Steel |
Velocidad | 800 rpm |
Tracción | Eje telescópico |
Diseño | Urethane: Recessed cleat, Steel: Intermeshing flutes V-10 |
Ancho | 279 cm 110 in |
Diámetro | 25,4 cm 10 in |
Tractor equipment
Enganche estándar | Rockshaft swivel |
Tractor connection | 21 spline |
Optional hitch | Drawbar swivel |
Presión hidraúlica requerida | 15.513 kPa 2.250 psi |
Información adicional
Fecha de recolección | 24 de agosto de 2020 |