With the most recent generation of the small drum headers, leading performance is proven. Due to feed availability pressures, the variety of plants and harvesting conditions becomes more and more challenging. The investment into a special head is expensive. The John Deere small-drum header is a good alternative to harvest a variety of crops.
The most challenging is the optimization of the crop flow in the header. An open construction was the solution. All drum scrapers or holders of divider points are positioned out of the crop flow. An accumulation or blocking of weeds and leaves will be avoided.
Open design dirt will fall out of the header
Beneficios:
The open design ensures the header is self-cleaning for cleaner silage.
The open design is more reliable because dirt does not build up in the header.
The saw blades of John Deere rotary crop headers cut quickly and thoroughly at a high speed of rotation. As the fast-turning blades cut the full width, crops can be harvested regardless of the row spacing. Thanks to this row-independent harvesting technology, the field can be worked from any side, which is particularly important for down crop.
The fast-turning saw blades allow crops with a lot of weeds to be harvested easily. Besides maize, a wide range of crops such as sorghum, whole crop silage, oilseed, canola, pampas grass, and miscanthus can be harvested.
Características principales:
Fast turning saw blades can cut in difficult harvesting conditions to give the operator increased uptime.
Headers can be used in various stemmed crops and there is no need for extra headers, which saves on the cost of operation.
Intake fingers push every plant into the gatherer drum
Plant pushed into the gatherer drum
After the fast-rotating blades cut the crop, the intake fingers push the plants into the gatherer drums that rotate in the same direction at low speeds. Every plant is pushed into the teeth of the gatherer drum. The specially designed shape of the teeth ensures that both small and large plants are conveyed in a secure way.
In the machine, the plants are taken off the back of the gatherer drum by scrapers. Depending on the width of the header, they are forwarded to the cross-feed drums or immediately fed into the angled feed drums in the middle of the machine.
Características principales:
Every plant is individually and securely pushed into the gatherer drum (Performance).
For eight- and 10-row machines, the third sensor is optional equipment. The third sensor is only available in combination with the RowSense™ system as it is installed in the central RowSense pointer.
The two-sensor Advanced Header Control (AHC) does a good job in most conditions. The optional third sensor is needed in extremely uneven terrain or on wide headers.
The AHC sensors are located at the two outermost points from the header. The sensors continuously scan the ground and adjust the height and inclination of the attachment. This quick adjustment guarantees a constant stubble height.
The AHC sensors are optional equipment for eight- and 10-row machines.
The AHC sensors are base equipment for 12-row machines.
Even feeding of the harvested crop bundled lengthwise to the chopper unit of the self-propelled forage harvester (SPFH) is crucial for an even cut. Only even, lengthwise feeding allows for the full use of the power installed on the SPFH.
Beneficios:
Bundling of lengthwise stalks is the basis for perfect cutting.
Six row with three rings of teeth-feeding crops to the SPFH
Eight, 10 and 12 row with two rings of teeth-feeding crops to the SPFH
Two angled feed drums push the crop toward the feed rolls of the SPFH. The size of the feed drums depends on the size of the header; the six-row headers feature three rings that push the crop in the feed rolls of the SPFH. The eight-, 10-, and 12-row headers feature a lower version with only two rings.
Beneficios:
The feeding drum size, depending on the working width, provides the necessary space to use 10- and 12-row headers, which allows for the operator to feed larger crop bundles to the SPFH.
Especificaciones clave
Rotary harvesting unit
Largo 1,7 m 5,7 ft Ancho total 7,5 m 24,6 ft Altura 1,8 m 6,8 ft Operating width 7,5 m 24,6 ft Ancho de transporte 3 m 9,8 ft Peso 3,27 kg 7.209 lb
Complete este formulario para solicitar una cotización. Un representante lo contactará tan pronto como sea posible.
Gracias por enviarlo.
Solicitar un servicio
Complete nuestro formulario de solicitud para programar un servicio.
Gracias por enviarlo.
Solicitar partes
Complete nuestro formulario para solicitarnos una parte.
Gracias por enviarlo.
Solicite partes usadas
Complete nuestro formulario de solicitud para consultarnos sobre partes usadas.
Gracias por enviarlo.
Solicitar alquiler
Complete nuestro formulario para solicitarnos un alquiler.
Gracias por enviarlo.
Contáctenos sobre Precision Ag
Complete nuestro formulario para solicitar la tecnología Precision ag.
Gracias por enviarlo.
Contacto
Complete nuestro formulario de contacto y un representante se comunicará pronto con usted.
Gracias por enviarlo.
Conozca más sobre nuestros programas de servicio
Gracias por enviarlo.
Envíenos sus comentarios
¡Nos encantaría recibir sus comentarios! Complete el formulario a continuación para compartirlo.
Gracias por enviarlo.
Taller
Complete este formulario para contactarse con nuestro taller. Un representante lo contactará tan pronto como sea posible.
Gracias por enviarlo.
Solicitud de información sobre programas de capacitación técnica de Papé
Gracias por enviarlo.
Solicitud de técnico
Gracias por enviarlo.
Eventos, donaciones y patrocinios
Gracias por enviarlo.
Únase al equipo de Papé
Complete hoy nuestro formulario de empleo y un representante se comunicará con usted pronto.
Gracias por enviarlo.
Contacto
Complete nuestro formulario de contacto y un representante se comunicará pronto con usted.
Gracias por enviarlo.
¡Gracias por participar, usted es importante para nosotros! Complete la información de abajo y uno de nuestros miembros le ayudará lo más pronto posible.
Gracias por enviarlo.
Thank you for your interest in electrification, you are important to us! Please fill in your information below and one of our members will reach out to you as soon as we can.
Gracias por enviarlo.
Participación en el sorteo
Gracias por enviarlo.
Encuesta de estado de vacunación
Gracias por enviarlo.
Boletín general
Gracias por enviarlo.
Boletín de Hawái
Gracias por enviarlo.
Solicitud de transferencia de concesionario
Gracias por enviarlo.
Contacto
Complete nuestro formulario de contacto y un representante se comunicará pronto con usted.
Gracias por enviarlo.
Thank you for your interest in upgrading to a premium John Deere compact utility tractor. Please fill in your information below and a Papé Machinery member will contact you shortly.