Cortadora giratoria RC2084
- John Deere
- Rotary Cutters FC Series
Buscar sucursal más cercana
Buscar ubicación
Características y especificaciones
- Easy-to-maneuver
- Adjustable cutting height
- Balanced blade pan
- Puncture-resistant rear tires
- Ancho útil 84 in (213,4 cm)
- HP de PTO 45 – 90 hp (33,6 – 67,1 kW)
- Categoría de enganche Cat. 2
- + Expandir todo
- - Cerrar todo
-
Deck deflectors offered in chain or rubber
The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.
These deflectors are available in:
- Rubber or chain on the front
- Metal or chain on the rear
-
Puncture-resistant rear tires
Choose a laminated or solid rubber rear tire for the RC20 Series Rotary Cutter. Both are puncture resistant.
The laminated tire is longer lasting and provides more support when working in sandy or lighter soil conditions.
-
iMatch™ hitch system provides quick and easy connections
The iMatch hitch system converts a tractor's 3-point hitch to fixed hooks and attaching points for a super-quick connection (the iMatch hitch is sold separately).
-
Adjustable cutting height
Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height.
The RC20 Series Rotary Cutters go as low as 3,8 cm (1,5 in.) or as high as 22,9 cm (9 in.).
-
Easy-to-maneuver deck
The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.
-
Reversible hitch accommodates many types of tractor hookups
The lower hitching point on the RC20 Series Rotary Cutter accommodates a reversible front hitch for smaller or older tractors.
-
Balanced blade pan reduces vibrations
There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration.
The blade bar is thicker for added durability.
-
Lower lip (Z-profile) increases durability and strength
The RC20 Series Rotary Cutters have a lower lip (Z-profile), which extends from the skid shoes to where the apron opens up. This Z-profile increases the overall durability and strength of the rotary cutter.
Blade holder
Diámetro | 567 mm 22,3 pulgadas |
Tipo | Round pan-type |
Cuchillas
Tipo | Heat treated, suction |
Ancho | 76 mm 3 in |
Espesor | 13 mm 0,5 pulgadas |
Velocidad de la punta | 66,5) m/s 13.090 fpm |
Capacidad
Cutting chamber depth | 19 cm 7,5 pulgadas |
Altura de corte | 4-23 cm 1,5-9 pulgadas |
Ancho de corte | 122 cm 48 in |
Cutting diameter | 0-2,5 cm 0-1 in |
Plataforma
Tipo | Simple |
Espesor | Calibre 11 3 mm 0,12 |
Shape | Flat-open round back |
Dimensiones
Longitud total | 220 cm 87 in |
Ancho total | 129 cm 51 in |
Transmisión
Tipo | Shear bolt or slip clutch |
Gear case
Potencia | 34 kW 45 HP |
Enganche
AutoHitch? compatible | sí |
iMatch? compatible | sí |
Tipo | Lift-type |
Categoría | Cat. 1, adaptable to Cat. 2 |
Seguridad
Front deflector | estándar |
Marcas | estándar |
Rear deflector | estándar |
Tiempo de instalación
Horas de trabajo | 1 |
Skirt
Espesor | Calibre 11 3 mm 0,12 |
Compatibilidad con tractores
PTO horsepower | 13-33 kW 18-45 hp |
Tractor PTO | 540 rpm |
PTO category | ASAE 3 |
Garantía
Caja de cambios | 1 años |
Período de tiempo | 1 años |
Peso
Operating | 232 kg 512 lb |
Ruedas
Tipo | Solid rubber or laminated |
Width laminated | 95 mm 3,75 pulgadas |
Diameter rubber | 381 mm 15 in |
Diameter laminated | 381 mm 15 in |
Width rubber | 95 mm 3,75 pulgadas |
Cantidad | 1 |