A heavy-duty, John Deere-designed and John Deere-built gearbox transfers power to the Kevlar® drive belts through cross shafts with intermediate bearing supports:
The transmission is bolted directly to the frame.
This gearbox has a constant-duty rating of 180 hp and a maximum rating of 270 hp.
It carries a limited two-year warranty.
Kevlar is a U.S.-registered trademark of E.I. du Pont de Nemours and Company.
The 520 Flail Shredder can be ordered with two different types of tractor hookup, drawn or integral, depending on preference. An integral flail shredder allows making a very tight turning radius, even when the tractor is equipped with dual wheels.
Optional wheel supports eliminate the uncut middle strip in crops like wheat, oats, and barley. The shredder can be pulled at an angle, offsetting the rotors and cutting evenly across the entire width of the machine.
Designed for superior rotor strength, the square rotor, together with the opposite-mounted flails, provides a machine with less potential vibration, increasing the life of rotor bearings and belts.
Since 248 knives are mounted on the full length of the rotors on the main cutterbar, with 2,5 cm (1 in.) of overlap, a stalk won't get missed. This is a significant improvement over the 216 knives mounted on the previous 220 Flail Shredder.
Front rubber deflectors keep debris and other materials under the shredder and away from the tractor and operator. Because they are made out of rubber, they will not dent or rust.
Hard-to-reach center bearings can be serviced with the conveniently located grease fittings at the rear of the machine:
There is no need for the operator to crawl under the machine to perform this service task, thus increasing the probability of the job being performed and completed safely.
Cutting capacity
Ancho de corte
6,1 m 20 ft
Altura de corte
7,6-25,4 cm 3-10 in
Dimensiones
Peso
2,27 kg 5.000 lb
Longitud de transporte
Endwise; drawn 7,34 m 24,08 ft Integral 2,39 m 7,83 ft
Ancho de transporte
Endwise; drawn 2,39 m 7,83 ft Integral 6,48 m 21,25 ft
Transmisión mecánica
Por correas
Kevlar, 3/5V heavy-duty
PTO drivelines
44,5 and 35,1 mm 1,75 and 1,38 in.
Cuchillas
Cantidad de cuchillas
248 side slicer (124 pairs)
Knife mounting system
Bracket and D-ring
Tipo
Alloy steel, hardened with vanadium carbide and reversible
Velocidad de la punta
224 km/h 139 mph
Knives overlap
27,18 mm 1,07 pulgadas
Knife dimensions
7,87 x 63,5 mm 0,31 x 2,5 in
Bastidor principal
Enganche
Drawn or Integral (Cat. 3 or 3N Quik-Coupler required)
Complete este formulario para solicitar una cotización. Un representante lo contactará tan pronto como sea posible.
Gracias por enviarlo.
Solicitar un servicio
Complete nuestro formulario de solicitud para programar un servicio.
Gracias por enviarlo.
Solicitar partes
Complete nuestro formulario para solicitarnos una parte.
Gracias por enviarlo.
Solicite partes usadas
Complete nuestro formulario de solicitud para consultarnos sobre partes usadas.
Gracias por enviarlo.
Solicitar alquiler
Complete nuestro formulario para solicitarnos un alquiler.
Gracias por enviarlo.
Contáctenos sobre Precision Ag
Complete nuestro formulario para solicitar la tecnología Precision ag.
Gracias por enviarlo.
Contacto
Complete nuestro formulario de contacto y un representante se comunicará pronto con usted.
Gracias por enviarlo.
Conozca más sobre nuestros programas de servicio
Gracias por enviarlo.
Envíenos sus comentarios
¡Nos encantaría recibir sus comentarios! Complete el formulario a continuación para compartirlo.
Gracias por enviarlo.
Taller
Complete este formulario para contactarse con nuestro taller. Un representante lo contactará tan pronto como sea posible.
Gracias por enviarlo.
Solicitud de información sobre programas de capacitación técnica de Papé
Gracias por enviarlo.
Solicitud de técnico
Gracias por enviarlo.
Eventos, donaciones y patrocinios
Gracias por enviarlo.
Únase al equipo de Papé
Complete hoy nuestro formulario de empleo y un representante se comunicará con usted pronto.
Gracias por enviarlo.
Contacto
Complete nuestro formulario de contacto y un representante se comunicará pronto con usted.
Gracias por enviarlo.
¡Gracias por participar, usted es importante para nosotros! Complete la información de abajo y uno de nuestros miembros le ayudará lo más pronto posible.
Gracias por enviarlo.
Thank you for your interest in electrification, you are important to us! Please fill in your information below and one of our members will reach out to you as soon as we can.
Gracias por enviarlo.
Participación en el sorteo
Gracias por enviarlo.
Encuesta de estado de vacunación
Gracias por enviarlo.
Boletín general
Gracias por enviarlo.
Boletín de Hawái
Gracias por enviarlo.
Solicitud de transferencia de concesionario
Gracias por enviarlo.
Contacto
Complete nuestro formulario de contacto y un representante se comunicará pronto con usted.
Gracias por enviarlo.
Thank you for your interest in upgrading to a premium John Deere compact utility tractor. Please fill in your information below and a Papé Machinery member will contact you shortly.